WHYNTER ENERGY STAR 50 PINT PORTABLE DEHUMIDIFIER WITH PUMP Model # : RPD-501WP INSTRUCTION MANUAL Congratulations on your new Whynter product. To ensure proper operation, please read this Instruction Manual carefully before using this product. Keep this manual in a safe place for future reference.
We trust that your Whynter dehumidifier will provide the performance and reliability that we stand for. Your Whynter dehumidifier is designed to remove moisture in the air by con- densation removal and collecting the condensation water in the drain bucket or draining through a drain hose.
TABLE OF CONTENTS PAGE DISPOSAL INFORMATION SAFETY PRECAUTIONS INTRODUCTION / TECHNICAL DATA PARTS AND CONTROLS 6 - 9 OPERATION INSTRUCTIONS 10 - 11 WATER DRAINAGE INSTRUCTIONS 12 - 14 MAINTENANCE TIPS ON WHEN TO USE YOUR PORTABLE DEHUMIDIFIER TROUBLESHOOTING 17 - 18 WARRANTY INFORMATION...
SAFETY PRECAUTIONS TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY WHEN USING YOUR PORTABLE DEHUMIDIFIER, FOLLOW THESE WARNING BASIC PRECAUTIONS: Read all instructions before using the appliance. Never clean appliance parts with flammable fluids. The fumes can create a fire hazard. Do not use an exces- sively wet cloth, industrial solvents, and oil-based products to clean this appliance.
Make sure the drain bucket is fitted correctly otherwise appliance will not turn on. Energy Saving Guide This Whynter dehumidifier is an Energy Star rated appliance. Follow the guide below can help to get the best performance and efficiency from your dehumidifier. ...
PARTS AND CONTROLS OTHER ACCESSORIES: 1. 20“ Continuous/ Gravity Drain hose 2. Continuous/ 6.75” Gravity Drain short hose and adapter 3. 16.5 ft. pump drain hose 4. Screws (2 pieces)
Page 7
PARTS AND CONTROLS 1. Pump Button Press to activate the pump operation. The Pump indicator light will illuminate when water pump is in operation. Note: Make sure the pump drain hose is installed into the unit and the continuous/gravity drain assembly is re- moved from the unit before the pump operation is activated.
Page 8
PARTS AND CONTROLS Energy Saver When the unit is running on normal operation, once the RH% is reached, the fan will still run continuously to avoid high start-up amperage which makes the unit energy-efficient . Please note that the fan may run continuously or shut off intermittently depending on the RH% and set humidity.
Page 9
PARTS AND CONTROLS Continuous Indicator Light To run the unit in continuous mode, press the Down button until the display reads 35%RH. Then press the Down button again until the display reads “CO” to initiate continuous operation and the Continuous indicator light will illumi- nate.
AIR FILTERS INSTALLATION Your Whynter portable dehumidifier is equipped with a 2 in 1 silver-coated washable pre-filter combo. This washable pre-filter removes large particles such as dust, pet hair and dander. The silver coating is designed to kill bacteria in the air and control the growth of microbes, such as viruses, fungi and spores.
Page 11
OPERATION INSTRUCTIONS POSITIONING THE UNIT This dehumidifier is intended for indoor residential applications only and should not be used for commercial or industrial applications. Place the dehumidifier on a smooth, hard and level floor strong enough to support the appliance with a full bucket of water.
WATER DRAINAGE INSTRUCTIONS Using a portable dehumidifier requires that collected water be emptied frequently. Draining water from this unit can be done in 3 different methods: 1. DRAIN BUCKET METHOD 1. The drain bucket can hold up to 14 pints of water. When the buck- et is full, the Full indicator light will light.
Page 13
WATER DRAINAGE INSTRUCTIONS 2. CONTINUOUS / GRAVITY DRAIN METHOD Water can be automatically emptied into a floor drain by attaching the 20” continuous/gravity drain hose to the con- tinuous/gravity drain outlet. To use gravity to drain your portable dehumidifier, it must be installed on a level surface or at least 12 inches above the ground, on a sturdy table or shelf unit.
WATER DRAINAGE INSTRUCTIONS 3. WATER PUMP METHOD One of the key features of this dehumidifier is that it has a water pump that pushes water up or over a longer dis- tance. Using this feature will enable your unit to run maintenance free. NOTE: The water pump will ONLY engage when the drain bucket is full.
MAINTENANCE Always turn off and unplug the dehumidifier before cleaning. 1. Cleaning the air grille and main unit Use a damp cloth to wrap the main unit or use water and a mild detergent. Do not use bleach, chemicals or abrasives.
Indoor environments with excessive moisture can cause mold and fungus to thrive inside the walls and be- neath the carpet. Many types of mold are potentially dangerous and can lead to health problems. The Whynter RPD -501WP portable dehumidifier reduces the amount of moisture in the air inside a home, which makes it far more difficult for harmful mold to grow.
TROUBLESHOOTING Many common portable dehumidifiers problems are easily resolved. Try the troubleshooting suggestions below to see if the problems can be resolved before having to contact the service department. Problem Possible Causes Solutions Power failure / outage. Restore the power supply. The dehumidifier does not ...
Page 18
Continuous/gravity drain hose Secure the drain hose. The dehumidifier leaks. is loose. Cracked drain bucket. Contact Whynter Service Department. Power failure or outage. Restore the power supply. The dehumidifier does not The automatic switch, line ...
(within two months of purchase; after two months to one year, cus- tomer will be responsible for freight cost to Whynter’s service department), along with an explanation of the claim to Whynter LLC. Please package the portable dehumidifier carefully in its original packaging material to avoid damage in transit.
Need help?
Do you have a question about the RPD-501WP and is the answer not in the manual?
Questions and answers