Advertisement
MODELS COVERED BY THIS MANUAL
475 Watt - 120 Volt Models:
HH1012T
(Plug-In with Thermostat)
HH1012N
(Plug-In No Thermostat)
HW1012T
(Hardwired with Thermostat)
HW1012N
(Hardwired No Thermostat)
475 Watt - 220 Volt Models:
HH1022T
(Plug-In with Thermostat)
HH1022N
(Plug-In No Thermostat)
HW1022T
(Hardwired with Thermostat)
HW1022N
(Hardwired No Thermostat)
475 Watt - 230 Volt Models:
HH1023T
(Plug-In with Thermostat)
HH1023N
(Plug-In No Thermostat)
HW1023T
(Hardwired with Thermostat)
HW1023N
(Hardwired No Thermostat)
United States Patent: 8,477,176
DCN-630013-110513
wall-mounted room heater
wall-mounted room heater
OWNERS
MANUAL
If you need Help
Features and Benefi ts
Important Instructions
What's in the box
Wall Mounting Instructions
Locking Bar Feature
Hardwiring Instructions
Operating Instructions
How the Envi Works
Unique Safety Features
Grounding
Optimal Operating Conditions
Maintenance
Storage
Troubleshooting
Specifi cations & Certifi cations
Warranty
TABLE OF CONTENTS
p 2
p 2
p 2
p 3
p 3
p 4
p 4
p 6
p 6
p 6
p 6
p 6
p 7
p 7
p 7
p 7
p 8
economical. safe. simple
Advertisement
Table of Contents
Related Manuals for Envi HH1012T
Summary of Contents for Envi HH1012T
- Page 1 Hardwiring Instructions HH1022T (Plug-In with Thermostat) HH1022N (Plug-In No Thermostat) Operating Instructions HW1022T (Hardwired with Thermostat) How the Envi Works HW1022N (Hardwired No Thermostat) Unique Safety Features Grounding 475 Watt - 230 Volt Models: Optimal Operating Conditions HH1023T (Plug-In with Thermostat)
-
Page 2: Features And Benefits
Please take a few moments to thoroughly read the instructions and familiarize yourself with all the operational aspects, instal- lation and care of your new Envi Heater. For your own records, please attach a copy of your sales receipt to this manual. Also, write the store name/location, date, and serial number in the warranty section on the back of this manual (page 8). -
Page 3: Installation Instructions
WHAT IS IN THE BOX (Fig. 2). The distance from the top screws to the fl oor • 475 Watt Envi Wall Mounted Heater should be approx. 18” to 20” (45cm to 50cm). • Owners Manual If a stud is in the way, do not use the drywall anchor •... - Page 4 HW1012N / HW1022N / HW1023N (with no built in thermostat, instead a cover plate is in its place) The Envi Heater can be hardwired direct to a mains supply, branch circuit or it can be hardwired to a line voltage external ther- mostat of the same voltage as the heater (eg.
- Page 5 STEP 3 Remove the Envi heater from the wall to continue with the hardwiring steps. If not already done at Step 1, remove a knock out hole (a screw driver can be used), on the back of the heater, and install the supplied protection grommet into the knockout hole.
-
Page 6: How It Works
The Envi’s inner chamber simulates “stacks” of varying height, which boost airfl ow through the heater to achieve maximum effi ciency. The end result is enhanced airfl ow at safe air temperature, all without the use of a fan. The Envi heater will provide consistent, comfortable, silent heat without drying out the air or leaving cold spots in the room. -
Page 7: Care And Maintenance Instructions
Envi heaters are installed. There is no need to increase the heat in the entire house when you only need comfort in the room in which you are currently located. -
Page 8: Warranty
Three Year Limited Warranty The manufacturer warrants the accompanying Envi Heater to be free of defects in material and workmanship for the ap- plications specified in its operation instructions for a period of THREE (3) years from the date of original purchase in the United States of America.
Need help?
Do you have a question about the HH1012T and is the answer not in the manual?
Questions and answers