UK, DE, DK, NL, FR, PL, SE, FI 1.2 In the package living eco® 014G0050 is supplied with a pre-mounted adapter for Danfoss RA valves, two alkaline AA batteries, a 2 mm Allen key and a Quick Guide in languages English, German, Danish, Dutch, French, Polish, Swedish and Finnish.
Installation Guide living eco® Electronic Radiator Thermostat 1.3 Overview of valve adapters Adapters for a wide range of different valve types are available as accessories. Adapter type Code no. Adapter Valve For Danfoss 014G0251 RA valves For M30 x 1.5 (K)
Installation Guide living eco® Electronic Radiator Thermostat 1.4 Installing the right adapter Adapter for RA valves (pre-mounted on 014G0050) Place the RA adapter on the valve as shown. Tighten the adapter with the 2 mm Allen key. Adapter for M30 x 1.5 (K) valves Place the K adapter on the valve as shown.
After approx. two weeks the symbol will flash 14 times from 19:00 to 21:00 hrs. Before the batteries run out living eco® will leave the valve in Frost Pro- tection position to protect the heating system from damage. 1.6 Using the buttons living eco®...
(see chapter 3.1). , press c. Set date with to confirm. 1.8 Installing living eco® Screw living eco® onto the adapter and tighten Activate Installation Mode to fix living eco® by hand (max. 5 Nm). correctly onto the valve: Press for 3 While slightly pressing forward, turn living seconds to select the Function Menu.
During the first night of operation living eco® will shut off the radiator heat and then open again to detect the exact opening point of the valve. This will allow living eco® to control the heat as ef- ficiently as possible. If necessary, the procedure is repeated once a night for up to a week.
Installation Guide living eco® Electronic Radiator Thermostat 1.11 Resetting living eco® to default settings Remove the battery cover and take out one Press and hold for approx. 5 seconds, while battery. reinserting the battery. 1.12 Removing an adapter from living eco®...
Installation Guide living eco® Electronic Radiator Thermostat 2. Technical specifications Thermostat type Programmable electronic radiator valve controller Recommended use Residential (pollution degree 2) Actuator Electromechanical Display Grey digital with backlight Software classification Control Power supply 2 x 1.5 V alkaline AA batteries 3 μW in standby...
(Frost Protection) Day of week The set temperature* * living eco® is displaying the set temperature, not the measured room temperature. 3.2 Programme menu To select the Programme menu: If the display The comfort period is shown in the display.
3 seconds. Display symbols in the Function menu Installation Mode must always be activated when installing or removing living eco®. The thermostat may be irreparably damaged if not in the correct position during installation. Child Lock - see chapter 5.4.
Period setting for the Travel programme. Deactivate/activate automatic daylight saving time - see chapter 5.3. Adjust living eco® to radiator/room conditions - see chapter 5.7. Deactivate/activate intelligent control (Forecast) - see chapter 5.9. Select moderate or quick heating control - see chapter 5.5 Note! Symbols must be flashing to be activated.
Note! If the set temperature is raised more than 1 °C living eco® will boost the radiator heat to reach the new temperature faster. You can feel the valve and radiator are getting warmer.
User Guide living eco® Electronic Radiator Thermostat 4.2 Default programme settings Programme P 0 This programme is without automatic temperature reduction. It will maintain the temperature at a constant comfort level all day and night. The default comfort temperature is 21 °C, but can be adjusted to any level between 6 and 28 °C.
User Guide living eco® Electronic Radiator Thermostat 4.3 Adjusting a setback period If the display is off, press , then press to select the desired period - choose again to open the programme menu. between the weekend, all weekdays or a to select the desired programme.
User Guide living eco® Electronic Radiator Thermostat 4.4 Creating a new setback period living eco® allows you to create up to three setback periods for each day. If the display is off, press , then press to select the desired period - choose again to open the programme menu.
User Guide living eco® Electronic Radiator Thermostat 4.5 Deleting a setback period If the display is off, press , then press to select the desired day(s), press again to open the programme menu. to confirm the selection. to select the desired programme.
User Guide living eco® Electronic Radiator Thermostat 4.6 Creating a Travel programme A Travel programme keeps the setback temperature for a period, defined by you. Use a Travel programme to save energy, when you are away from home. If the display is off, press , then press The current day is flashing.
User Guide living eco® Electronic Radiator Thermostat 4.7 Overrule a Travel programme (early return) If returning earlier than expected you might wish to shift from the Travel programme to your normal programme. If the display is off, press . The display will Press again to open the programme menu.
User Guide living eco® Electronic Radiator Thermostat 4.9 Deleting a Travel programme If the display is off, press , then press to select OFF, press to confirm. again to open the programme menu. to select , press to confirm. 4.10 Creating a Frost Protection programme The frost protection programme keeps the setback temperature until another programme is selected.
User Guide living eco® Electronic Radiator Thermostat 5. Additional settings 5.1 Setting the time If the display is off, press , then press Hours flashes, use to set and press again and hold for 3 seconds. confirm. Then Minutes flashes, use...
0, press to confirm. confirm. 5.4 Child Lock Protect your living eco® settings from tampering by activating the Child Lock. If the display is off, press , then press is shown on the Home Screen, indicating again and hold for 3 seconds.
When Open-window has been activated, the function is quarantined for 45 minutes. Note! Be aware that the Open-window function will be affected, if curtains or furniture is covering living eco®, thus preventing it from detecting the decreasing temperature. Danfoss Heating Solutions...
User Guide living eco® Electronic Radiator Thermostat 5.7 Adjusting to radiator/room conditions Change this setting if the radiator is over- or undersized for the room. This will help living eco® to work more efficiently. If the display is off, press...
Electronic Radiator Thermostat 5.9 Deactivating intelligent Control (Forecast) The Intelligent Control (Forecast) ensures that living eco® reaches the comfort temperature on time, according to the settings. This default function can be deactivated. If the display is off, press...
Need help?
Do you have a question about the Living Eco and is the answer not in the manual?
Questions and answers