Silvercrest DP-5300 Series User Manual And Service Information page 20

Note: For further information, please check the instruction manual offered by your screen. On the TV screen
you'll see the DVD player's start screen.
6. If no picture is displayed, press the V-Mode button (button 20 on the fold-out cover page) of the remote
control to enable the SVHS Output of your Silvercrest DVD player and press the button as many times as
necessary to display the picture.
Video Connection to a TV set/Beamer with Component Video
Inputs (YCbCr/YPbPr)
When using Component Video, the video signal is split into three separate "components", resulting in a higher
picture quality than for S-Video or Composite video. For the Component video output you need a TV screen or
beamer featuring three Component video inputs.
Furthermore, you will need a special Component video cable (not included in the package) with separate
connectors for the Y, Cb/Pb and Cr/Pr signals. This cable also supports the high-end Progressive Scan mode
when used together with a high-end P-Scan-compatible screen.
To use the Component video output or Progressive Scan mode, the following steps must be performed:
17