Starting The Heating System Using The Controls - Buderus Logano G115 WS US Operating Instructions Manual

3.3

Starting the heating system using the controls

Switching on the controls automatically places the burner
on standby. The burner is then ready to start. For more
information, consult the instruction manual for the controls
and the burner.
V Set the boiler temperature control to "AUT" (Automatic
mode). In that setting, the controls operates the boiler.
V Set the ON/OFF switch to position "I" (ON).
Information on operating the system, e.g. set-
ting the temperatures, can be found in the
controls' documentation.
Starting up the system using the Aquastat
V Switch on emergency shut-off switch ("ON" position).
This turns on the heating system.
Logano G115 WS US/CA - Technical specifications are subject to change without prior notice.
Commissioning the heating system
1
Fig. 3 Switching on the controls
(e.g. Logamatic 2000 )
Fig. 4 Switching the heating system on/off using the
emergency shut-off switch (without Buderus
controls)
3
2
7 747 019 141-28.1RS
7 747 019 141-35.1RS
9