Enable/Disable Code 39 Full Ascii - Philips Speechmike6284 Configuration Manual

Enable/Disable Code 39 Full ASCII

Parameter # 0x11
To enable or disable Code 39 Full ASCII, scan the appropriate bar code below.
When enabled, the ASCII character set assigns a code to letters, punctuation marks,
numerals, and most control keystrokes on the keyboard.
The first 32 codes are non-printable and are assigned to keyboard control characters
such as BACKSPACE and RETURN. The other 96 are called printable codes because
all but SPACE and DELETE produce visible characters.
Code 39 Full ASCII interprets the bar code special character ($ + % /) preceding a
Code 39 character and assigns an ASCII character value to the pair. For example, when
Code 39 Full ASCII is enabled and a +B is scanned, it is interpreted as b, %J as ?, and
$H emulates the keystroke BACKSPACE. Scanning ABC$M outputs the keystroke
equivalent of ABC ENTER.
Code 39 Full ASCII and Trioptic Code 39 should not be enabled simultaneously.
The scanner does not autodiscriminate between Code 39 and Code 39 Full ASCII.
ENAB LE CODE 39 FULL ASCII
(0x01)
DISABLE CODE 39 FULL ASCII
(0x00)
51