Jumpers And Connectors; Table 1.1:Jumper Descriptions; Table 1.2:Connector Descriptions - Advantech PCE-7210 User Manual

1.4 Jumpers and Connectors

Connectors on the PCE-7210 single board computer link it to external
devices such as hard disk drives and a keyboard. In addition, the board has a
number of jumpers used to configure your system for your application.
Below, Table 1.1 and Table 1.2 list the jumper and connector functions.
Later sections in this chapter give instructions on setting jumpers. Chap-
ter 2 gives instructions for connecting external devices to your single
board computer.
Table 1.1: Jumper descriptions
Label
CMOS1
JWDT1
Table 1.2: Connector descriptions
Label
IDE1
IDE2
FDD1
LPT1
VGA1
VGA2
DVI1
COM1
COM3
COM4
KBMS1
KBMS2
JIR1
CPUFAN1
CPUFAN2
JFP1
Function
CMOS Clear
Watchdog timer output option
Function
Primary IDE connector
Secondary IDE connector
Floppy drive connector
Parallel port
VGA connector
VGA-2 connector
DVI connector
Serial port:COM1 ( 9-pin connector)
Serial port:COM3 ( 9-pin connector)
Serial port:COM4 ( 9-pin connector)
PS/2 keyboard and mouse connector
External keyboard/mouse connector
Reserved
CPU1 FAN connector
CPU2 FAN connector
Power and Reset Button connector
7