High Tech Pet Power Pet Installation & Operating Instructions Manual
Fully automatic pet door
Hide thumbs
Also See for Power Pet:
- Installation instructions manual (29 pages) ,
- Installation and operating instructions manual (16 pages)
Related Manuals for High Tech Pet Power Pet
Summary of Contents for High Tech Pet Power Pet
-
Page 1: Operating Instructions
Fully Automatic Pet Door INSTALLATION & OPERATING INSTRUCTIONS U.S. PATENT # 5,872,516... -
Page 3: Product Description
INTRODUCTION Product Description: Your new POWER PET Electronic Pet Door is like no other pet door made. Patented POWER PET electronic pet doors are fully automatic, mo- tor driven and open completely under their own power. Activated by an ultrasonic pet collar, your new POWER PET door will keep out stray animals. - Page 4 Only Power Pet doors feature an ingenious directional sensing system that operates a fully automatic, motor driven panel. The signal emitted from your pet’s collar tells the Power Pet door how far away your pet is and the direction in which your pet is traveling. This allows the Power...
- Page 5 The Power Pet’s directional ultrasonic system overcomes these prob- lems. The Pet worn ultrasonic collar emits a highly directional signal, which is received by the microphone only when your pet is directly fac- ing the door opening.
-
Page 6: Wall Installation
FRAME thick there is no framing necessary. The pre-made Outer Frame that came with your POWER PET door will provide a finished look to the open- ing. If you are installing your POWER PET door in a wall, it is advisable to... -
Page 7: Cutout Dimensions
17.25 11.25” Reference Line Reference Line 8.88 12.88 Final cut out size should include the thickness of any additional wall framing (not required for door mount or when using optional wall mount kit) ___________________________________________________________________________________________ High Tech Pet Products, Inc. www.hightechpet.com... -
Page 8: Important Installation Notes
INSTALLING YOUR POWER PET DOOR This is the easy part. Install the POWER PET and Outside Frame as shown below. 1. Cut Hole (wall installations 2. Install Power Pet will require framing) door See installation notes Door Wall OUTSIDE INSIDE 3. - Page 9 Battery if AC Power Is Lost.) Manual Open Button Automatic Battery Power Monitoring Dual Range Controls For Independant Control of Inside and Outside Distance 4 Way Access Control In and Out In Only Out Only Closed ___________________________________________________________________________________________ High Tech Pet Products, Inc. www.hightechpet.com...
-
Page 10: Advanced Features
The door panel weighs only about 2 lbs. AUTO RETRACT FEATURE As an added safety feature, the POWER PET also has a sensing system that automatically raises the panel should it encounter an obstruction ___________________________________________________________________________________________ www.hightechpet.com... - Page 11 4 to 5 foot distance outside.) Your new POWER PET PX gives you full control. Note: range markings on the door are not in units of distance, but rather in signal strength.
- Page 12 Adjusting the Range When you first install the POWER PET PX door, pre-set both RANGE Controls - one at a time - to the desired activation distance as fol- lows: - Enable just the INSIDE or OUTSIDE sensor and set that RANGE control to zero.
- Page 13 If you wish to leave the door open for an extended time period, use the Hold Open Mode, as follows. The door panel will remain open as long as power is available. ___________________________________________________________________________________________ High Tech Pet Products, Inc. www.hightechpet.com...
- Page 14 Power Adaptor plugged into the door, use this feature sparingly to keep from discharging the battery in just a few hours. AUTOMATIC SAFETY RETRACT: Your POWER PET PX is intrinsically safe for all pets and people, including small children. The door panel weighs less than 2 lbs.
-
Page 15: Adjusting The Strap
PET COLLAR OPERATING INSTRUCTIONS Your POWER PET DOOR comes with a standard model MS-4 or MS-5 ultrasonic transmitter collar. Each collar includes a battery TEST button which illuminates a red LED when the battery is OK. If the LED fails to light, battery replacement is necessary. - Page 16 3. Replace battery top with the metal ring visible. 4. Carefully mate top and bottom while keeping aluminum speaker centered in the top hole. Squeeze together the top and bottom until both ends snap. ___________________________________________________________________________________________ www.hightechpet.com High Tech Pet Products, Inc.
- Page 17 3. Remove bottom, note battery orientation 4. Remove and replace B3V1A battery 5. With new battery installed, close case. Squeeze until bottom flush with top, by squeezing top and bottom together 6. Insert and tighten screw. ___________________________________________________________________________________________ High Tech Pet Products, Inc. www.hightechpet.com...
-
Page 18: Water Resistance
POWER PET opens whenever the pet comes its way. One of the most frequent comments we hear from POWER PET owners is how much their pets love using their POWER PET door. We are sure your pet will feel the same! REPLACEMENT PARTS Over the years you may need to replace damaged or worn out parts. - Page 19 MANY CONVENIENT ACCESSORIES! We’ve added all sorts of great new options to make your POWER PET PX the most versatile pet door you’ll find. EXTRA PET COLLARS: Model MS-4 or MS-5 Ultrasonic Transmitter Collar You may wish to purchase an Extra col- lar for each additional pet and keep one or two more as spares.
- Page 20 For the ultimate in convenience we recom- mend that you purchase this kit and one extra rechargeable battery above. Use one battery in your POWER PET door and keep the other in the charger. When your door battery runs down...
- Page 21 Operated from your pet’s standard MS-4 transmitter included with your POWER PET Door. Also, operated by the optional RC-7000X collar. Order one for each part of your yard where pets don’t belong.
-
Page 22: Troubleshooting Guide
1) Replace main circuit board manual button or collar Multiple collar failures 1) Upgrade to MS-4 or MS-5 collar Range is difficult to adjust to 1) Replace main circuit board less than five or six feet ___________________________________________________________________________________________ www.hightechpet.com High Tech Pet Products, Inc. - Page 23 LOCKING PIN SWITCHES (PART OF MAIN WIRE HARNESS) SLIDING DOOR PANEL LEFT POWER PLUG RIGHT (PART OF MAIN POWER PLUG WIRE HARNESS) (PART OF MAIN WIRE HARNESS) MICROPHONES (PART OF SENSOR CABLE ASSEMBLY) ___________________________________________________________________________________________ High Tech Pet Products, Inc. www.hightechpet.com...
-
Page 24: Order Information
ORDER INFORMATION To order extra collars and accessories please visit our website at www.hightechpet.com or call 1 (800) 255-1279 High Tech Pet Products, Inc. 2476 Palma Drive, Suite A Ventura, CA 93003 www.hightechpet.com Rev. V – 12/13/2012 px-with-ms4-manual...
Need help?
Do you have a question about the Power Pet and is the answer not in the manual?
Questions and answers