Broadcast Storm Control; Broadcast Storm Control Overview; What You Can Do; Broadcast Storm Control Setup - ZyXEL Communications GS1920 Series User Manual

15.1 Broadcast Storm Control Overview

This chapter introduces and shows you how to configure the broadcast storm control feature.
Broadcast storm control limits the number of broadcast, multicast and destination lookup failure
(DLF) packets the Switch receives per second on the ports. When the maximum number of
allowable broadcast, multicast and/or DLF packets is reached per second, the subsequent packets
are discarded. Enable this feature to reduce broadcast, multicast and/or DLF packets in your
network. You can specify limits for each packet type on each port.

15.1.1 What You Can Do

Use the Broadcast Storm Control screen
broadcast, multicast and destination lookup failure (DLF) packets the Switch receives per second on
the ports.

15.2 Broadcast Storm Control Setup

Click Advanced Application > Broadcast Storm Control in the navigation panel to display the
screen as shown next.
GS1920 Series User's Guide
C
HAPTER

Broadcast Storm Control

(Section 15.2 on page
1 5
128) to limit the number of
128