NEC SL1000 User Manual page 2

Before using Your Telephone...
Thank you for purchasing NEC SL1000 system.
Due to the flexibility built into the system, your Dialing Codes and Feature Capacities may differ
from those in this guide. Check with your NEC Authorized Supplier / System Administrator and make a
note of any differences.
Installing the Handset and Line Cord
Cord can be
installed either way
Adjust the Two-Position Viewing Angle
To set the low viewing angle position:
1. Fold the legs all the way back.
To set the high viewing angle position:
1. Flip up the two leg supports.
2. Fold the legs back until the supports contact
the base.
When installing the handset:
Handset Cord
1. Make sure the handset cord is plugged into the
handset jack on the telephone base.
2. The line cord routes through the channel on the
telephone base.
3. Alternatively the line cord can route through the
channel on the telephone legs.
- 1 -