Related Manuals for LENCO MES-403
Summary of Contents for LENCO MES-403
- Page 1 PORTABLE DVD USER'S MANUAL MES-403 Before connecting, operating or adjusting this product, For information and support,WWW.lenco.eu please read this user's manual carefully and completely.
-
Page 2: Important Safety Instructions
Important Safety Instructions 12.WARNNING: Only use attachments/accessories specified 1.Warning: To reduce the risk of electric shock, do not remove provided by the manufacturer, the portable DVD is supplied by the cover or back. There are no user-serviceable parts inside. AC adapter, the AC adapter is used as disconnect device, the Refer servicing to qualified personnel. -
Page 3: Safety Precautions
Safety Precautions Notes on Copyrights: WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN 7. It is forbidden by law to copy, broadcast, show,broadcast via cable, play in public, or rent copyrighted material without permission. 1.Warning: This digital video disc player employs a laser system. Use of controls,adjustments, or the performance of procedures 8. -
Page 4: Mounting In The Vehicle
Mounting in the Vehicle Use the supplied car mounting straps to install the main unit and monitor on the back of the vehicle's headrests.Tightly wrap the mounting strap around the headrest. Dear Customer: Box content: Thank you for purchasing this Portable DVD player . 1 x main unit 1 x slave unit When opening the box for the first time, please check whether all... -
Page 5: Main Unit
Identification of Controls Main Unit MASTER TFT SCREEN 1.SD/MS/MMC 2. POWER ON/OFF 3. HEADPHONE OUT JACKS 4. VIDEO/AUDIO OUT 5. DIGITAL AUDIO OUT (COAXIAL) 6.USB 7. DC OUT 8. DC IN 9-12V 9. ENTER 10. UP/DOWN/LEFT/RIGHT 11. SOURCE 12. UP/DOWN 13. -
Page 6: Identification Of Controls
Identification of Controls Remote control unit 5.10+ BUTTON In order to select a track 10 or greater, first press 10+, For example; select track 12, first press 10+, and then press number 2 button. 6. MENU/PBC STEP MUTE SOURCE Return to DVD root menu(DVD). PBC on/off switch (VCD) . - Page 7 Identification of Controls Remote control unit 25.SLOW BUTTON Press Slow button repeatedly to enter slow playback, and cycle Press BUTTON allow skipping back at 5-level speed(X2->X4-> X8->X16->X32 -> PLAY), press PLAY button return to normal playback. between different speeds. The speeds are 1/2,1/4,1/8,1/16,and normal.
-
Page 8: Setup Menu Setting
Setup Menu Setting General Setup Page Press SETUP button to get the setup menu. Use direction buttons Angle Mark to select the preferred item. After finishing settings, press Displays current angle setting information on the right hand corner of the TFT screen if available on the disc. SETUP again to normal display. -
Page 9: Video Setup Page
Setup Menu Setting Audio Setup Page Video Setup Page Downmix Video Setup Page This options allows you to set the stereo analog output of your DVD Player. LT/RT :Select this option if your DVD Player is connected to a - - VIDEO SETUP PAGE - - Dolby Pro Logic decoder. -
Page 10: Password Setup Page
Setup Menu Setting Password Setup Page Preference Page Password: select the menu password change page. PAL - Select this if the connected TV is PAL system.It change will video signal of a NTSC disc and output in PAL format. NTSC-Select this if the connected TV is NTSC system.It will change the video signal of a PAL disc and output in NTSC format. -
Page 11: Picture Page
Parameters and specifications Slaver TFT Menu Setting Electronical parameters Picture Page Brightness Item Standard requirement PICTURE Adjust screen Bright Setting. Power requirements : AC 100-240 V , 50/60 Hz Contrast BRIGHT Adjust screen Contrast Setting. Power consumption : <15W CONTRAST Color COLOR Operating humidity...
Need help?
Do you have a question about the MES-403 and is the answer not in the manual?
Questions and answers