Installation; System Requirements; Please Note Before Connection - Silvercrest SP-2010 User Manual And Service Information

2.1 loudspeaker system in a contemporary design

Hide thumbs Also See for SP-2010:

Table of Contents

Installation

• Computer with soundcard

• Audio device with audio output (3.5 mm jack socket).

Before connecting the 2.1 loudspeaker system the following

must be ensured:

• The 2.1 loudspeaker system and the audio device which is to be

connected must be switched off.

Otherwise a short circuit can occur when the plugs are connected

which can damage the speakers and/or the audio device.

• The subwoofer

placed on a level, firm surface. The distance between the sub-

woofer and the satellite loudspeakers / audio device / mains socket

must be selected so that the length of the respective cable is suffi-

cient. The cables should never be put under strain.

• Read the section "Safety Instructions"

and the two satellite loudspeakers

Silvercrest 2.1-Speaker System SP2010

English

must be

Table of Contents