E.3.1.1 Home > Remote Access Mode - Comtech EF Data CDM-625 Installation And Operation Manual

CDM-625 Advanced Satellite Modem
Appendix E
E.3.1.1 Home > Remote Access Mode
In order to proceed with the operations described through the remaining chapter, you must be
sure to set Remote Access Mode to [Ethernet] in order for configuration changes to be saved
into memory.
First, from the Home menu, press [K] to open the Remote Access Mode dialog window:
Then, use the ↑↓ arrow keys to select the Remote Mode as Ethernet, and press [ENTER] to
accept the selection. Finally, press [F8] to save to memory. Note the following:
Remote Access Mode Selection
Local
Serial
EDMAC Slave
Ethernet
Function
Configuration using Front Panel only
Chapter 5. FRONT PANEL OPERATION
Configuration using Serial Port
• Sect. 5.2.1.12 CONFIG: REMOTE (Remote Control)
• Appendix D. REMOTE CONTROL
EDMAC mode cannot be set here – the CLI displays "EDMAC
Slave" when the modem is in EDMAC Slave Mode
Chapter 11. EDMAC CHANNEL
Configuration using SNMP / Telnet CLI / Web Server Interface
Chapter 6,. ETHERNET-BASED REMOTE PRODUCT
MANAGEMET
E–11
Revision 13
MN-CDM625