88 | HDZ Series 1080p IP PTZ User Manual
2.
Saving the Motion Detection Settings
After you have configured the motion detection settings in the Motion Detection section of the
System tab, click Save.
Click Save after you have configured the motion detection settings in the Motion Detection
section of the System tab. See
Detection Window, page
Detection Actions, page
information.
Network Failure Detection Settings
You can set up the camera to send an alarm notification when a network failure is detected. You
can send a message to an FTP or email server, or you can upload images to a Micro SDHC card.
To set up network failure detection:
1.
www.honeywell.com/security
Select one of the following options for the file name format:
•
Add date/time suffix to add the date and time in YYMMDD_HHMMSS format (for
example, image120428_034724.jpg).
•
Add sequence number suffix (no maximum value).
•
Add sequence number suffix up to [number] and then start over, and enter a
value in the number field.
•
Overwrite to overwrite an older file with a new file with a static filename.
83,
Setting the Motion Detection Sensitivity, page
85, and
Navigate to System
Network failure detection (see
Setting the Motion Detection Status, page
Setting a Motion Detection File Name on page 87
83,
Setting the Motion
84,
Setting the Motion
for more
Figure
6-17).