SA-HT680PL
10.6. Disassemble Rear panel
· Follow the (Step 1) - (Step 2) of Item 10.3.
Step 1 Detach wire at the connector. (CN2013)
Step 2 Unscrew the screws.
Step 3 Release the tabs.
Step 4 Remove rear panel.
10.7. Disassemble Main P.C.B.
· Follow the (Step 1) - (Step 2) of Item 10.3.
· Follow the (Step 1) - (Step 4) of Item 10.6.
Step 1 Unscrew the screws.
Step 2 Detach FFC/wire at the connectors. (CN2000, CN2001,
CN2011, CN2004, CN2006)
Step 3 Release the tab.
Step 4 Remove Main P.C.B..
10.8. Disassemble of Regulator
P.C.B.
· Follow the (Step 1) - (Step 2) of Item 10.3.
· Follow the (Step 1) - (Step 4) of Item 10.6.
· Follow the (Step 1) - (Step 4) of Item 10.7.
Step 1 Unscrew the screws.
Step 2 Detach FFC at connector. (CN2007)
10.9. Disassemble of AC Inlet P.C.B.
& Transformer P.C.B.
· Follow the (Step 1) - (Step 2) of Item 10.3.
· Follow the (Step 1) - (Step 4) of Item 10.6.
· Follow the (Step 1) - (Step 4) of Item 10.7.
Step 1 Detach FFC/wire at connectors. (CN502, CN503)
20