Key To Symbols; Symbols - Husqvarna Rider 318 Operator's Manual

Symbols

These symbols are on the machine and in the instr uctions.
WARNING! Careless or incorrect use can
result in serious or fatal injury to the
operator or others.
Please read the operator's manual
carefully and make sure you understand
the instructions before using the machine.
Alw ays wear:
• Approved hearing protection
This product is in accordance with
applicable EC directives.
F ast
Slo w
Stop the engine .
Chok e.
Fuel
Oil le vel
Cutting height
Bac kwards
F orwards
Ignition
Hydrostatic free wheel
P arking brake
KEY T O SYMBOLS
Noise emission to the en vironment
according to the European Community's
Directive. The machine's emission is
specified in chapter Technical data and on
label.
Clutch in
Clutch out
W arning: rotating parts. Keep hands and
feet clear.
Rotar y blades Keep hands and feet
away from under the hood when the
engine is running
Hot surf ace.
Risk that the machine will tip o ver
Ne ver drive across a slope
Ne ver use the machine if persons,
especially children, or animals, are in the
vicinity
Ne ver carry passengers on the machine or
equipment
Dr ive very slowly if no cutting unit is fitted
The cutting deck must be fitted at full
speed.
Br ake
– 5
English