Chapter 3. Using The Lenovo Preferred Pro Usb Fingerprint Keyboard; Creating A Passport And Enrolling Fingerprints; Swiping Your Finger Over The Fingerprint Reader - Lenovo Preferred Pro User Manual

Chapter 3. Using the Lenovo Preferred Pro USB Fingerprint
Keyboard
This section provides information about using the fingerprint reader on the keyboard.

Creating a passport and enrolling fingerprints

To create a passport and enroll your first fingerprint, do the following:
1. Open the ThinkVantage Fingerprint Software window by doing one of the following:
• Click Start ➙ All Programs ➙ ThinkVantage ➙ ThinkVantage Fingerprint Software. The
ThinkVantage Fingerprint Software window opens.
• Click Start ➙ All Programs ➙ Lenovo ThinkVantage Tools. Then, double-click Fingerprint
Reader. The ThinkVantage Fingerprint Software window opens.
2. Enter your Windows password and click Submit. The End User Agreement window is displayed.
3. Carefully read the End User Agreement and click Accept.
Note: You must agree to the End User Agreement to install the product.
4. When a dialog with two hands is displayed, select a finger to enroll by clicking the button above the
finger.
5. Swipe the selected finger over the fingerprint sensor. Good quality matching fingerprints are required. It
is strongly recommended that you enroll more than one finger in the event of injury.
6. (Optional - only if supported by your computer) A Power-on button is displayed above each finger.
Click the Power-on button above the selected finger. The selected finger will be used instead of your
power-on and/or hard disk passwords (BIOS passwords) at the system startup.
Notes:
• If you do not use a Windows password, you will be prompted to define one. This is optional, but a
password improves the security of your software.
• For more information about enrolling your fingerprint for power-on and hard disk drive passwords
(BIOS passwords), see "Enrolling your fingerprints for BIOS passwords" on page 10.

Swiping your finger over the fingerprint reader

To swipe your finger over the fingerprint reader, do the following:
1. Place your fingertip on the small circular indentation above the reader, as shown below. Ensure that the
rest of your finger is flat on the reader.
Figure 4. Placing your fingertip above the reader
© Copyright Lenovo 2010, 2013 7