Table of Contents
Advertisement
Intermittent Pilot
Ignition (IPI) Fire-
places
Owners
Guide
LIGHTING INSTRUCTIONS (IPI)
1. STOP! Read the safety information
on page 9 first!
2. Turn off all electric power to the ap-
pliance.
3. This appliance is equipped with an ig-
nition device which automatically
lights the burner. Do not try to light
the burner by hand.
GAS
VALVE
4. Wait five (5) minutes to clear out any
gas. Then smell for gas, including
near the floor. If you smell gas,
STOP! Follow "B" in the Safety Infor-
mation located on the previous pages.
If you don't smell gas, go to next step.
IPI CONTROL VALVE
Figure 8. Intermittent Pilot Ignition
Lighting Your Intermittent Pilot Ignition Fireplace
Owners Guide
do not
5. Turn on all electric power to the appli-
ance.
6 To light the burner, flip the ON/OFF
switch to the “ON” position. (The ON/
OFF switch may include a wall switch if
so equipped).
7. If the appliance will not operate, fol-
low the instructions “To Turn Off Gas
to Appliance” and call your service
technician or gas supplier.
TO TURN OFF
GAS TO APPLIANCE
1. Turn off all electric power to the appliance
if service is to be performed.
2. Flip ON/OFF switch to the “OFF” position.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Gas Fireplace and is the answer not in the manual?
Questions and answers
My gas fireplace logs with a knob used to light makes a sound when not in use. This happened before and the dealer made a service call and adjusted. What is causing this and can I adjust. Thanks
The Heat-N-Glo gas fireplace may produce noise due to metal expanding and contracting as it heats up and cools down. This is a normal occurrence and does not affect the operation or longevity of the fireplace. There is no mention of an adjustment to eliminate this noise.
This answer is automatically generated
Fireplace turned on by itself. Remote won't turn it off or adjust flame