Add Services Or Applications To The Cluster; Entering Cluster Name - HP StorageWorks P4000 User Manual

4. On the Access Point for Administering the Cluster page, type a unique name for the cluster and
then click Next.
Figure 17 Entering cluster name
.
5. Review the information on the Confirmation page and then click Next.
After the cluster is successfully created, the Summary page lists basic cluster information. Click
View Report to view a detailed report. Click Finish to exit the Create Cluster Wizard.

Add services or applications to the cluster

For the purposes of this document, the following procedure illustrates adding a File Server; however,
any supported service or application can be added for high availability. For example, you may choose
to add NFS/CIFS or iSCSI LUNs to the cluster.
1. In the Failover Cluster Management user interface, locate the newly-created cluster in the left pane
and then click Services and Applications.
2. In the Actions pane, click Configure a Service or Application.
The High Availability Wizard appears.
3. On the Before You Begin page, click Next.
P4000 Unified NAS Gateway User Guide 33