Front Fan Bracket - HP ProLiant DL380 Generation 4 User Manual

Install the fan.
3.
Be sure that the fan LED is green
4.
Install the access panel
5.
Be sure that the front panel internal health LED is green
6.

Front fan bracket

To remove the component:
Power down the server (on page 27).
1.
Extend or remove the server from the rack
2.
Remove the access panel
3.
Remove the front fan bracket.
4.
Remove all hot-plug fans from the front fan bracket.
5.
To replace the front fan bracket, reverse the removal steps and press down on the top of each fan to be
sure it is seated properly.
("Hot-plug fan LED" on page 24).
("Installing the access panel" on page 29).
("Extend the server from the
("Removing the access
("Front panel LEDs and
rack" on page 28).
panel" on page 29).
Hardware options installation 53
buttons" on page 9).