Advertisement
Quick Links
MB-18
18" Dual-Flex Gooseneck Intended for 1600VP Microphone System
Description
The MB-18 is an 18" dual-fl ex gooseneck intended to support
the Astatic 1600VP microphone system. The MB-18 is designed
to fi t on a quick-mount type XLRF-type connector mounted in
a table or shock mount. The dual-fl ex gooseneck features
a diameter of 8mm on the bottom and 6mm on the top for
exact positioning and low visibility.
The MB-18 is terminated with a TA3F-type connector which
mates with the microphone head of the Astatic 1600VP
microphone system. The opposite end of the gooseneck is
fi tted with a XLRM-type connector to be used for mounting the
gooseneck to a base, shock mount or chassis type connector.
RF Resistant Architecture provides greatly reduced susceptibility
to radio interference from GSM based cell phones/smart phones,
two-way walkie-talkies and similar communication devices.
Features
• Silent, durable 18" (45.7cm) dual-fl ex gooseneck
• RF (radio frequency) Resistant Architecture
• Quick-mount format
Shown with 1600VP
Microphone System
Dimensional Drawing
Advertisement
Related Manuals for CAD Audio MB-18
Summary of Contents for CAD Audio MB-18
- Page 1 18" Dual-Flex Gooseneck Intended for 1600VP Microphone System Description The MB-18 is an 18" dual-fl ex gooseneck intended to support the Astatic 1600VP microphone system. The MB-18 is designed to fi t on a quick-mount type XLRF-type connector mounted in a table or shock mount.
- Page 2 In the unlikely event that a defect occurs CAD Audio will, at its option, either repair or replace with a new unit of equal or greater value. Retain proof of purchase to validate the purchase date and return it with any warranty claim.
Need help?
Do you have a question about the MB-18 and is the answer not in the manual?
Questions and answers