Connecting The Cmc To Utility Power - HP Console Management Controller User Manual

Connecting the CMC to Utility Power

If a UPS is installed in the rack, connect the CMC to the UPS. If a UPS is not
installed in the rack, use a grounded utility power outlet.
The power for the fan outputs comes from the voltage monitor input. If the
rack configuration includes fans, the rack fans must be powered from the fan
power output sockets.
NOTE: Do not connect the voltage monitor input to a UPS.
WARNING: To reduce the risk of electric shock or damage to the equipment,
take these precautions:
I
Plug the input line cord into a grounded (earthed) electrical outlet that is
installed near the equipment and is easily accessible.
I
Do not disable the grounding plug on the input line cord. The grounding
plug is an important safety feature.
I
Do not use extension cords.
WARNING: Power grounds for the main AC input and the voltage monitor input
are tied common within the CMC.
Installation 2-21