Managing System; Upgrading The System Firmware; Restoring Default Settings - HIKVISION DS-7300 Series User Manual
Hide thumbs
Also See for DS-7300 Series:
- User manual (227 pages) ,
- Quick start manual (13 pages) ,
- User manual (67 pages)
Table of Contents
Advertisement
Managing System
Upgrading the System Firmware
The system firmware for your DVR can be updated from a USB storage device.
To update the system firmware:
1. Enter the Firmware Upgrade menu, shown in Figure 56 by going to Main Menu > Maintenance > Firmware
Upgrade.
2. Connect the USB storage device to a USB port on the DVR.
3. Click the Refresh button. The contents of the USB storage device will be shown on the screen.
4. Select the firmware file. The firmware file is named digicap.mav.
5. Click the Upgrade button to upgrade the DVR. The DVR will automatically reboot after the upgrade is
completed. If you do not wish to upgrade at this point, click the Cancel button.
Restoring Default Settings
To restore factory default settings to your DVR:
1. Enter the Factory Default menu, shown in Figure 57 by going to Main Menu > Maintenance > Factory
Default.
Hikvision USA, Inc. – Series DS-7300 User Manual
Figure 56. Firmware Upgrade Menu
Figure 57. Factory Default Menu
62
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the DS-7300 Series and is the answer not in the manual?
Questions and answers
unde este "butonul de reset" la dvr seria ds-7300. **** update firmware ip-ul este 0.0.0.0 si nu mai are scris admin iar parola nu mai este cea pe care o stiam.