Setting The Steering Switch Function (U.s.a. Only) - Fujitsu CD5425 Owner's Manual

Setting the steering switch function (U.S.A. only)

The vehicle's factory loaded steering switch becomes inoperable
when the CD5425 is installed. The ECLIPSE website (E-iSERV)
provides software that enables steering switch operation even with
the installation of the deck. Import this software into your CD5425.
Depending on your vehicle's make and model, material downloaded
from the website may not be compatible with your steering switch.
Software for the steering switch can be downloaded and imported
into the deck as follows:
Access The ECLIPSE Website. (URL : http/www.e-iserv.jp)
Download the steering switch software following instructions provided
on the ECLIPSE website (E-iSERV). (Because material available on
the website may not be compatible with the steering switches found on
some automobiles, make sure to check the website for details about
compatibility.)
Copy the downloaded software to CD-R.
Import the data into the deck from the CD-R.
(For details about importing into the deck, see page 46.)
The steering switch can be operated.
Consult the store from which you purchased your CD5425 about
compatibility and set-up procedures.
45
Basic operation