Customizing Standard Features
Configuring Ring Tones
STEP 1
STEP 2
STEP 1
STEP 2
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
To configure ring tones:
Click Admin Login > advanced > Voice > Phone and scroll to the Ring Tone
section.
Configure the characteristics of each ring tone by using a Ring Tone script.
Specify:
•
Name (n)—Ring tone name, such as Classic, Simple, or Office
•
Waveform (w):
-
(Not supported on the Cisco SPA300 Series or Cisco SPA5XXG.)
-
(Cisco SPA525G or Cisco SPA525G2) 1, 2, 3, 4, file://Pulse1.raw, file://
Ring7.raw, file://Warble.raw, w=file://Low.raw, file://Floor.raw, file://
Reverb.raw
•
Cadence (c)—1, 2, 3, 4, or 5 (Not supported on the Cisco SPA300 Series or
Cisco SPA5XXG.)
Click Submit All Changes.
You can also configure four additional ring tones to replace up to four of the
standard default ring tones. The following user-configurable ring tones are
available:
GUI Label
Warble
Low
Floor
Reverb
To configure/provision these ringtones:
Click Admin Login > advanced > Voice > Phone and scroll to the Ring Tone
section.
In the Ring Tone section, modify the n and w parameters in four of the 12 ring fields
(Ring1 to Ring12). Set the n parameter to the label of the ringtone you want
Value of the w Parameter
w=7
w=8
w=9
w=10
3
79