Contents Welcome What's in the box Headset overview Charge case overview Pair Get Paired Pair another device Multi-connectivity Charge Check battery level Use charge case The Basics Power the earbuds on or off Audio Adjust the volume Mute Make/Take/End Calls More Features Deepsleep Mode Stay connected...
Welcome Congratulations on purchasing your new Plantronics product. This guide contains instructions for setting up and using your Backbeat Go 2 earbuds. Please refer to the safety instructions in the quick start guide for important product safety information prior to installation or use of the product.
Headset overview Charge port Headset indicator light (LED) Volume up button: Increases volume, skips to next track Audio/call button: Powers on/off earbuds, answers/ends/declines call, plays/pauses music Volume down button: Decreases volume, plays previous track Mute/Unmute...
Charge case overview Micro USB plug Press for charge case battery level Micro USB charge port Charge case indicator lights; indicates charge case battery level and indicates charge state of earbuds...
Pair Get Paired The first time you power on your earbuds, it begins the pairing process. Power on the earbuds. The indicator light, located on the right earbud, flashes red and blue to indicate pairing mode. ® Activate Bluetooth on your phone and set it to search for new devices. •...
Page 8
After, the earbuds accept the new connection, there is no need to delete and re-pair your devices each time; they are remembered and ready to connect anytime when in range.
Charge Your new earbuds have enough power to pair and make a few calls. To access the charging port, insert your fingernail into the groove on top of the right earbud and pull down. It takes up to 2.5 hours to fully charge the earbuds. While charging, the indicator light is red and turns blue once charging is complete.
Use charge case With a fully charged case, charge your earbuds for 20 minutes to add up to an hour of power. Charge the earbuds for 2.5 hours for a full charge. You can check charge case battery level by pressing the Battery status button . Charge case indicator light Battery high Battery medium...
Selecting the right size eartip is essential for you to fully appreciate the premium audio quality the earbuds offer. Acoustic seal Out of the box, the medium eartips are installed on the earbuds. We recommend that you try each eartip (small, medium and large), perform a sound check and choose the eartip that gives the best sound experience.
The Basics Power the earbuds on or Press the Audio/call button / until you hear “power on." To power off, press the Audio/call button / for 4 seconds until you hear "power off." Audio Play or pause audio Tap the Audio/call button Skip to next track Press the Volume up (+) button for more than 1 second.
Page 13
Redial Double tap the Audio/call / button to dial the last number you called.
More Features Deepsleep Mode If you leave your headset powered on but out of range of your paired phone for more than 20 ™ minutes, your headset will conserve its battery power by entering into a DeepSleep mode. Once back in range with your phone, press any button to exit DeepSleep mode. If your phone is also ringing, tap the Call button again to answer your call.
Specifications Talk/Listening time Up to 4.5 hours listen/5 hours talk* Standby time Up to 10 days* DeepSleep technology Provides up to 180 days* of battery readiness Operating distance (range) Up to 33 feet from phone or tablet Headphones weight 14 grams Audio HQ custom SBC codec, 6mm neodymium speakers, Frequency response 20-20,000 Hz, Total Harmonic...
Need help?
Do you have a question about the Backbeat Go 2 and is the answer not in the manual?
Questions and answers