HP 715 User Manual page 60

Problem
The incorrect
language is
set on the
camera.
A long delay
occurs after I
press the
shutter button
and before
the camera
takes a
picture.
A red light
appears next
to the
viewfinder
when I press
the
SHUTTER
button.
52
Possible cause
The wrong language
was selected when
you started the
camera the first
time.
The camera is still
saving the last
picture you took.
The light is low and
the flash is turned
off.
The camera is still
saving the last
picture you took.
The CF memory
card has insufficient
space for the
picture. (The status
000
LCD shows
pictures remaining.)
The CF memory
card that you have in
the camera is
damaged or is not
formatted.
The flash is
recharging.
Solution
Change the camera language by using
the camera's Setup menu.
1 After opening the Setup menu, use
the down side of the
to scroll to the last menu option.
2 Press the right or left side of the
controller until the desired language
appears, and then press
Wait a few seconds for the camera to
finish processing the image, and then
press the
SHUTTER
When a steady green light appears next
to the viewfinder, the camera is ready to
take another picture.
In dim light the camera requires a longer
exposure. Keep the camera very steady
by placing it on a tripod until it takes the
picture; or improve the lighting
conditions or use the flash.
Wait a few seconds for the camera to
finish processing the image, and then
press the
SHUTTER
When a steady green light appears next
to the viewfinder, the camera is ready to
take another picture.
Install a new CF memory card, make
room on the current card by deleting or
unloading photos, or select a lower
image quality setting.
Format the CF memory card or replace it
with a new, formatted card.
Wait until the flash icon on the status
LCD stops blinking before taking another
flash picture.
HP photosmart 715 user guide
controller
.
OK
button halfway down.
button halfway down.