• Cleaning and user maintenance shall not be made by children without supervision. General Safety • The appliance and its accessible parts become hot during use. Do not touch the heating elements. • Do not operate the appliance by means of an external timer or separate remote-control system. www.zanussi.com...
3 mm. Electrical connection • Use only correct isolation devices: line pro- tecting cut-outs, fuses (screw type fuses re- www.zanussi.com...
Page 4
• Used oil, that can contain food remnants, can • Do not clean the burners in the dishwasher. cause fire at a lower temperature than oil • Clean the appliance with a moist soft cloth. used for the first time. Only use neutral detergents. Do not use www.zanussi.com...
5 seconds; this will let thermocouple to warm up. If Always light the burner before you put not, the gas supply will be interrupted. cookware. 4. Adjust the flame after it is regular. To light the burner: www.zanussi.com...
Make sure that pots are centrally put on the Warning! Make sure that the bottoms of rings in order to get maximum stability and to pots do not stand above the control get lower gas consumption. www.zanussi.com...
• To make the burners work correctly, make Centre to check the conditions of the gas sup- sure that the arms of the pan supports are in ply pipe and the pressure adjuster, if fitted. the centre of the burner. www.zanussi.com...
5 seconds. The gas ring burns unevenly • Burner crown is blocked with • Make sure that the injector is food residues not blocked and the burner crown is clear of food particles. www.zanussi.com...
For appliances installed in the Republic of Ire- compliance with standards and local land please refer to NSAI- Domestic Gas In- regulations in force. stallation I.S. 813 Current Editions and the ET- CI Rules for Electrical Installations. www.zanussi.com...
Page 10
Make sure that, once the hob is installed, it is Important! Make sure that the gas supply easily accessible for the engineer in the event pressure of the appliance obeys the of a breakdown. recommended values. www.zanussi.com...
Page 11
(see the rating screw in. plate) • If you change from liquid gas to natural gas G20 20 mbar, undo the by-pass screw ap- proximately 1/4 of a turn. www.zanussi.com...
Page 12
'E', or the earth symbol , or col- oured green and yellow. 2. Connect the blue (neutral) wire to the ter- minal which is marked with the letter 'N' or coloured blue. www.zanussi.com...
>PE<,>PS<, etc. Discard the packaging mate- otherwise be caused by inappropriate waste rials as household waste at the waste disposal handling of this product. For more detailed facilities in your municipality. www.zanussi.com...