Function - Haier HL19SL2 Owner's Manual

Operation
B
Press
and CH+/- button to go up and down to select the
desired option.
C
Press
button increase and decrease the level to adjust the
selected option to your preference.
D
Repeat step 2 and step 3 until desired audio quality
has been achieved.

Function

Tuner Mode :Press
Antenna or Cable.
Channel Scan : Press
to scan, press EXIT to cancel.
Channel Scan
All channels now available will be automatically
preset in order .After the search has finished, the
first program number will display on the screen. This
search automatically adds only the active channels in
your area to the TV's memory. It deletes any channels
on which there is no broadcast or a poor signal. The
channels found are automatically saved.
Channel Skip :Press
enter the submenu, then press
select the channel number (eg.2) and press
to
ENTER to confirm, a mark will be display in the
pane as follows and this channel will be skipped
next time you press
digits button to select the channel
resume the channel, press ENTER button again.
EN-13
Downloaded from www.Manualslib.com
VOL+/ ENTER button to enter the menu
VOL+/ ENTER button to confirm and VOL+/-
/ button to select
VOL+ ENTER
/ button to start
VOL+ ENTER
Video
Status: Scanning... Antenna
Analog Channels: 4
Digital Channels: 3
Audio
Channel
Function
Lock
EXIT
/ button to
VOL+ ENTER
CH+/- button
CH+/- button but you can press
. If you want to
Haier LED HDTV
manuals search engine
Video
Audio
Channel
Function
Lock
Channel Skip
Channel Labels : Allows you to name the channel
that is selected. Press
enter the submenu.
Video
Audio
Channel
Function
Lock
Channel Label Set
Then press
CH+/- button to
and
VOL+/- button to select the position of the item that
you want to change, afterward press INPUT to input the
40%
numbers and symbols and ENTER button to confirm.
Cancel
Time Shifting Mode :
Mode on or off.
A
Set the Time Shifting On, then insert the USB drive in
the USB input.
B
Press PLAY/PAUSE to play or pause the program. If
you want to stop time shift function, press the STOP
button.
You can stop the time shift program being played
by pressing the STOP button.
-00:00:01
-00:00:01
1
x
1.Timeshift time. The time offset to the current time.
2.Playback status: It shows the playback status for
timeshift component.
2 Analog
3 Analog
4 Analog
5 Analog
5-1 Digital
6 Analog
7 Analog
8 Analog
9 Analog
10 Analog
CH+/-
Select
ENTER Set EXIT Back
VOL+/-
/ button to
VOL+ ENTER
Channel Index 1
Channel Label
CH+/-
Select EXIT Back
VOL+/-
select Channel Index
To turn the Time Shifting
7:00 7:30
7:00 7:30