Kenwood DNN9350BT Instruction Manual page 17

Return to the Top page
Basic Operations
Color
Set the screen and button illumination color. You can select whether to allow color scan operation or
select a fixed color for operation.
1 Touch [SET].
2 Touch [ON] or [OFF] of [Panel Color Scan].
3 If you want to change color, touch [SET] of [Panel Color Coordinate].
4 Touch your desired color and [
For details on operation, see
Camera
Set the parameters for the camera.
1 Touch [SET].
2 Set each item and touch [
For details on operation, see
DEMO
Set the demonstration mode. Default is "ON".
1 Touch [ON] or [OFF].
4
Touch [Finish].
NOTE
• These settings can be set from the SETUP menu. See
16
].
Panel color coordinate (P.115).
].
Camera Setup (P.116).
Setting Up (P.110).