Pip Swap; Using Rotate Function - AG Neovo SX-17P User Manual

USING THE LCD DISPLAY
3.5.2

PIP Swap

The main and the sub source signals set in PIP Setting can be easily
swapped using the keypad.
Main source
Touch the button to swap the main source and the sub source
signals. See illustration below.
Main source

3.6 Using ROTATE Function

The ROTATE function allows you to rotate the screen image at 180°.
Original screen
image
Touch the button to rotate the picture 180º. See illustration below.
After executing ROTATE, touch the
the picture back to its normal state.
Sub source
Sub source
After ROTATE
image
button again to rotate
21
Note:
♦
PIP Swap can only be executed
if PIP is enabled, see page 33.
Note:
♦ ROTATE function can only be
executed if PIP is off, see page
33.