Fitting The Mulching Plug To The Mower - McCulloch M46 Owner's Manual

Failure to follow instructions can result in serious personal injury. Spend a few moments to
familiarize yourself with your mower before each use.
Model No. M46
9096-305209
FITTING THE MULCHING PLUG TO THE MOWER (OPTIONAL)
FITTING THE MULCHING PLUG TO THE MOWER (OPTIONAL)
1. Stop the engine.
1. Stop the engine.
2. Make sure the discharge chute and the underside of the mower are clean.
2. Make sure the discharge chute and the underside of the mower are clean. If not, clean the
If not, clean themower.
mower.
3. Raise the flap with left hand, and using the hand-hold on the mulching plug, insert the
3. Raise the flap with left hand, and using the hand-hold on the mulching plug, insert the
mulching plug, with the angled section to the mowers right, into the discharge chute.
mulching plug, with the angled section to the mowers right, into the discharge chute. Make
Make sure the back of the plug is sitting on the rear axle, then lower the flap.
sure the back of the plug is sitting on the rear axle, then lower the flap.
Fig. 8A
Fig. 8B
14
14
AU
AU