Acer Supra 818PD Operation Manual page 66

15
16
17
18
19
AUTOMATIC CROSS JOG FEED
REGULATOR / RAPID CROSS FEED
SPEED REGULATOR / AUTOMATIC
CONTINUOUS CROSS FEED SPEED
REGULATOR
20
AUTOMATIC CROSS JOG FEED
REGULATOR / SLOW CROSS FEED
SPEED REGULATOR / AUTOMATIC
CONTINUOUS CROSS FEED SPEED
REGULATOR
21
SPINDLE START KEY
22
SPINDLE STOP KEY
23
LONGITUDINAL FEED HYDRAULIC
SYSTEM START KEY
24
LONGITUDINAL FEED HYDRAULIC
SYSTEM STOP KEY
25
Spare
Spare
Spare
Spare
Spare
Spare
Spare
Spare
Spare
Spare
1: For adjusting big jog feed amount in automatic cross
feed.
2: For adjusting rapid cross feed speed.
3: For increasing speed during performing automatic
continuous cross feed.
1: For adjusting small jog feed amount in automatic cross
feed.
2: For adjusting slow cross feed speed.
3: For reducing speed during performing automatic
continuous cross feed.
1: Press this key for starting spindle running (For CE
approved model, start the hydraulic system, then start
the grinding wheel running).
2: When the indication lamp lights on, it means the
spindle is running (Care should be taken for safety,
and prevent your head, hands and body from touching
the running grinding wheel).
1: Press this key for stopping spindle.
2: When the indication lamp lights on, it means the
spindle stop.
1: Press this key for starting the hydraulic system for
table longitudinal feed.
2: When its indication lamp lights on, it means the
hydraulic system is working.
1: Press this key for stopping the hydraulic system for
table longitudinal feed.
2: When its indication lamp lights on:
(1) Hydraulic system for longitudinal feed stops.
(2) Hydraulic system running is allowed.
3: When the indication lamp 25A does not light on:
(1) It means the throttle handle for longitudinal feed is
12
818~2040PD