Installing Expansion Cards - Fujitsu 5000 Series User Manual

3 Installing Expansion Cards

This section explains how to install expansion cards, which extend the range of the features of
your PC.
Point
- To install an expansion card, set up the PC, turn off the power, and install the expansion card.
- The first to fourth white slots from the top are for PCI cards.
- Only a half-size expansion card can be installed in the first slot from the top.
- When an expansion card using a serial port such as a modem card is installed, change the
duplicated serial port to "Not used" in the BIOS setup.
WARNING
Electric shock
CAUTION
Injury
26
To prevent electric shock, before installing and removing expansion cards,
turn off the PC and connected units and unplug power cords from respective
outlets.
To prevent electric shock, fire, and/or malfunction, install only Fujitsu brand
expansion cards in the PC.
To prevent injury, when installing and removing expansion cards, remove
screws only from specified locations.
PCI bus
PCI bus