Engine Oil Change - Honda EB3000c Owner's Manual

SERVICING YOUR GENERATOR

ENGINE OIL CHANGE

Drain the oil while the engine is warm to assure rapid and complete
draining.
1.Place a suitable container below the engine to catch the used oil, and
then remove the oil filler cap, drain plug, and sealing washer.
2.Allow the used oil to drain completely, and then reinstall the drain
plug and a new sealing washer. Tighten the plug securely.
Improper disposal of engine oil can be harmful to the environment.
If you change your own oil, please dispose of the used oil properly.
Put it in a sealed container, and take it to a recycling center. Do not
discard it in a trash bin, dump it on the ground, or pour it down the
drain.
3.With the generator in a level position, fill with the recommended oil to
the upper limit of the oil filler neck (see page 39).
Maximum oil capacity: 18 oz (0.55 L)
4.Reinstall the oil filler cap securely.
Wash your hands with soap and water after handling used oil.
38
SEALING WASHER
(Replace)
OIL DRAIN PLUG
UPPER LIMIT
