Du Specifications; Figure 2.16 Du Conceptual Diagram; Table 2.7 Connection Of Iou With Du; Table 2.8 Du Specifications - Fujitsu PRIMEQUEST 2000 Series General Description Manual

CHAPTER 2 Hardware Configuration
2.8 DU (Disk unit)
Connection source
IOU#0
IOU#1
IOU#2
IOU#3

2.8.1 DU specifications

This section shows the conceptual diagram and specifications of the DU.
PCI Express slot
Main Board
HDD slot
HDD hot plug
Enclosure Management
Supported RAID level
LED
Dimension (mm) (except protrusions)

TABLE 2.7 Connection of IOU with DU

Destination
DU#0-PCI Slot#0
DU#0-PCI Slot#1
DU#1-PCI Slot#0
DU#1-PCI Slot#1

FIGURE 2.16 DU conceptual diagram

TABLE 2.8 DU specifications

Item
Connection destination HDD
For two HDD per
SAS RAID controller card
HDD#2, #3 in DU#0
HDD#0, #1 in DU#0
HDD#2, #3 in DU#1
HDD#0, #1 in DU#1
Specifications
PCI Express Gen3, 4 Lane slot ×2
PCI Express slot and SGPIO Controller for mounting the
SAS RAID controller card
2.5 inch SAS/SATA-HDD slot×4
Supported (*1)
SGPIO Present monitoring and Fault LED control by
SGPIO controller (each HDD)
0, 1, 5, 6, 10 (*2)
Power, Attention, Access LED (for each HDD), Alarm
LED (each HDD)
Width 45 x Depth 526 x Height 215
42
For four HDD per
SAS RAID controller card
DU#0 HDD#0,#1,#2,#3
DU#0 HDD#0,#1,#2,#3
DU#1 HDD#0,#1,#2,#3
DU#1 HDD#0,#1,#2,#3
C122-B025-02EN