Summary of Contents for Nexxus Lighting Savi SAVI-PL-12-50
Page 1
SAVI POOL LIGHT & SAVI SPA LIGHT INSTALLATION INSTRUCTIONS & OWNERS MANUAL This manual is for the following models: IMPORTANT NOTICE SAVI-PL-12-50 SAVI-SL-12-100 SUBMERGE BEFORE SAVI-PL-12-100 SAVI-SL-120-100 OPERATING LIGHT. SAVI-PL-120-100 Serious and permanent damage may occur to the unit if light is not submerged during operation.
GENERAL & SAFETY INFORMATION - SAVE THESE INSTRUCTIONS The underwater lighting fixture you have purchased is ETL Listed under file number 3089958CHI and must be used with an appropriate ETL or UL Listed fixture housing (niche). Installation of light and niche must be in accordance with Article 680 of the National Electrical Code (NEC) and any applicable local codes.
INSTALLATION INSTRUCTIONS STEP 1 18” MIN. FROM WATER LEVEL TO TOP OF LENS The light fixture must be installed in or on a wall of the pool with the top of the lens opening not less than 18 inches (457mm) below the normal water level of the pool.
Page 6
INSTALLATION INSTRUCTIONS (cont.) STEP 4 Coil the extra electric cord into the niche so it fits behind the lighting fixture (see diagram). Place the fixture into the niche with face rim lock-screw at top (12 o’clock). Snap the spring clip at the bottom of the face rim onto the notch in the bracket at the lower edge of the niche.
OPERATING INSTRUCTIONS - Changing the color modes of the light. PROGRAM GUIDE 1. Treasure Island smooth color transition 2. Moonlight White fixed color 3. SAVI Blue fixed color - dark blue 4. Sargassion Sea fixed color - green 5. Blue Lagoon fixed color - light blue 6.
Page 9
OPERATING INSTRUCTIONS (cont.) II. OPERATING INSTRUCTIONS FOR SPA LIGHTS ONLY (SAVI-SL-12/120 - for spas without a pool) NOTE: Your SAVI Pool & Spa Light will always come ON as white light for 13 seconds before initiating the “memory feature.” DO NOT ATTEMPT TO CHANGE MODES DURING THIS TIME. How to ADVANCE the light to the next color mode: Spa Light Only (SAVI-SL-12/120) With the light(s) turned...
OPeRATING INSTRUcTIONS (cont.) How to ADVANCE only the Spa Light(s) one mode and FREEZE the Pool Light(s): With the light(s) turned ON, turn the light switch to the OFF position. off position for 3-5 seconds and then turn the switch back ON. Hold the light switch at the ADVANCE the Spa Light(s) to the next color mode while keeping the Pool Light FROZEN.
Page 11
SAVI POOL LIGHT & SAVI SPA LIGHT ACCESSORIES Adaptor for Pool Niche SAVI Pool or Spa Light ORDERING INFORMATION SAVI-PLATE-W shown hite daPtor late Shown with SAVI Pool SAVI-PLATE-B Light inserted. lack daPtor late SAVI-PLATE-G daPtor late sAVI P llows Ight to fIt Into A stAndArd sIze Pool nIche Adaptor for Fiberglass Spa Niche...
NO WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS MADE OR IS TO BE IMPLIED. In no event shall Nexxus Lighting be liable for any other costs or damages including labor charges, lost profits or revenues, incidental, special or consequential damages.
Need help?
Do you have a question about the Savi SAVI-PL-12-50 and is the answer not in the manual?
Questions and answers