Crown XTi 1002 Operation Manual
  1. Manuals
  2. Brands
  3. Crown Manuals
  4. Amplifier
  5. XTi 6002
  6. Operation manual

Crown XTi 1002 Operation Manual

Xti2 series
Hide thumbs Also See for XTi 1002:
Table of Contents

Advertisement

Quick Links

XTi2 Series Operation Manual
Obtaining Other Language Versions: To obtain information in another language about the use of this product, please contact your local Crown Distributor. If you need
assistance locating your local distributor, please contact Crown at 574-294-8000.
This manual does not include all of the details of design, production, or variations of the equipment. Nor does it cover every possible situation which may arise during
installation, operation or maintenance.
The information provided in this manual was deemed accurate as of the publication date. However, updates to this information may have occurred. To obtain the latest
version of this manual, please visit the Crown website at www.crownaudio.com.
Trademark Notice: Crown, Crown Audio, and Amcron are registered trademarks of Crown International. Other trademarks are the property of their respective owners.
Later versions of this manual and additional information about this product may be available at the Crown website at www.crownaudio.com.
Some models may be exported under the name Amcron
©2011 by Harman International, 1718 W. Mishawaka Rd., Elkhart, Indiana 46517-9439 U.S.A. Telephone: 574-294-8000.
®
XTi 1002
XTi 2002
XTi 4002
XTi 6002
143060-2 - 4/11

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XTi 1002 and is the answer not in the manual?

Questions and answers

Related Manuals for Crown XTi 1002

Summary of Contents for Crown XTi 1002

  • Page 1 Crown website at www.crownaudio.com. Trademark Notice: Crown, Crown Audio, and Amcron are registered trademarks of Crown International. Other trademarks are the property of their respective owners. Later versions of this manual and additional information about this product may be available at the Crown website at www.crownaudio.com.

  • Page 2: Important Safety Instructions

    XTi2 Series Power Amplifiers Important Safety Instructions 1. Read these instructions. WATCH FOR THESE SYMBOLS: 2. Keep these instructions. The lightning bolt triangle is used to alert the user to the risk of electric shock. 3. Heed all warnings. The exclamation point triangle is used to alert the user to important 4.

  • Page 3: Declaration Of Conformity

    XTi2 Series Power Amplifiers DECLARATION OF CONFORMITY Issued By: Harman International. FOR FIELD SERVICE 1718 W. Mishawaka Rd. QUESTIONS CALL: 1 800 342 6939 Elkhart, IN 46517 U.S.A. European Representative’s Name and Address: David J. Budge 10 Harvest Close Yateley GU46 6YS United Kingdom Equipment Type: Power amplifiers...

  • Page 4: Get Started

    Plugs, or bare wire. XTi 6002 back panel shown. WARNING: Before you start to set up your See page 9 for XTi 1002, 2002 and 4002 back panel. amplifier, make sure you read and observe the Important Safety Instruc tions found at the beginning of this manual.
  • Page 5 XTi2 Series Power Amplifiers Get Started Factory Preset #3: XOVER HIGH 2+/– Putting the amplifier in XOVER mode enables a 1.2kHz 4th order (24dB/octave) filter that sends frequencies of 1.2kHz and below to Channel 1 output and LOW 1+/– frequencies of 1.2kHz and above to Channel 2 output. The XTi2 Series amplifiers come pre-loaded with a preset that makes it easy to configure the amplifier for this operation.

  • Page 6: Ensure Proper Cooling

    XTi2 Series Power Amplifiers Get Started Get Started Factory Preset #5: SUBSYNTH Putting the amplifier in SUBSYNTH mode allows you to turn on the SubHarmonic Synth feature for use with a subwoofer on both channels. The inputs are automatically summed, a 90Hz 4th order (24dB/octave) filter is enabled on both Channel 1 and Channel 2, and the SubHarmonic Synth feature is turned on at +12dB level.
  • Page 7 XTi2 Series Power Amplifiers Welcome There’s no debate – when you choose Crown’s XTi2 Series, you’re choosing one of the most powerful and innovative amplifiers on the market today. That’s because the all-new XTi2 Series amps continue to set the standard for unmatched performance and value, delivering the goods night after night without breaking a sweat.

  • Page 8: Front Panel Features

    XTi2 Series Power Amplifiers Front Panel Features Indicators: Ready Indicator: Two green LEDs, one for each channel, illuminate when the amplifier is ready to produce audio. Signal Presence Indicator: Two green LEDs, one for each channel, illuminate when the channel input exceeds -40dBu. Useful for troubleshooting cable runs. -20 Indicator: Two green LEDs, one for each channel, illuminate when the output signal exceeds -20dB below clip.

  • Page 9: Back Panel Features

    XTi2 Series Power Amplifiers Back Panel Features XTi 1002, 2002, 4002 Binding Post Output Jacks: One pair per channel, accepts banana plugs or bare wire. Note: Binding Post outputs on European Power Cord Clip: Input Connector: models come with safety plugs installed to prevent...

  • Page 10: Front Panel Navigation

    XTi2 Series Power Amplifiers Front Panel Navigation From the front panel, you can change settings for several of the amplifier’s integrated signal processing features: Input Y, Crossover Frequency, EQ, Delay, Limiting, and Stereo/Bridge-Mono. The Icons in the display illuminate to show which features are currently applied and turned on.

  • Page 11: Integrated Processing Features

    XTi2 Series Power Amplifiers Integrated Processing Features The XTi2 Series amplifiers include a number of integrated processing features which appear as icons on the front panel LCD screen. They are described below: NOTE: System Architect Software is required to have full control over all Integrated Processing Features which can be downloaded from the following URL –...
  • Page 12 XTi2 Series Power Amplifiers Integrated Processing Features Advanced Thermal Control In this section, you can tailor the fan speed to specific applications. You have the choice of the following modes: The fan mode can be changed using the front panel buttons at start-up or in the software. The default mode is normal and should work fine for most applications.
  • Page 13 XTi 1002: 6.8A, XTi 2002: 8.3A, XTi 4002: 10.5A; at idle draws no more than 30 watts. XTi 6002: 15.3A; at idle draws no more than 180 watts. Voltage Gain (at 1 kHz, 8 ohm rated output): XTi 1002: 30.5 dB. XTi 2002: 32.9 dB. XTi 4002: 34.2 dB. XTi 6002: 37.1 dB.

  • Page 14: Worldwide Service

    Complete the Crown Audio Factory Service Information form, in the back of this manual, when returning a Crown product to the factory or authorized service center. The form must be included with your product inside the box or in a packing slip envelope securely attached to the outside of the shipping carton.
  • Page 15 Estimate Approval Approval of estimate must be given within 30 days after being notified by Crown Audio Inc. Units still in the possession of Crown after 30 days of the estimate will become the property of Crown Audio Inc.

  • Page 16: Summary Of Warranty

    XTi2 Series Power Amplifiers Warranty — UNITED STATES & CANADA SUMMARY OF WARRANTY Crown International, 1718 West Mishawaka Road, Elkhart, Indiana 46517-4095 U.S.A. warrants to you, the ORIGINAL PURCHASER and ANY SUBSEQUENT OWNER of each NEW Crown product, for a period of three (3) years from the date of purchase by the original purchaser (the “warranty period”) that the new Crown product is free of defects in materials and workmanship.
  • Page 17 XTi2 Series Power Amplifiers Warranty — WORLDWIDE EXCEPT USA & CANADA SUMMARY OF WARRANTY Crown International, 1718 West Mishawaka Road, Elkhart, Indiana 46517-4095 U.S.A. warrants to you, the ORIGINAL PURCHASER and ANY SUBSEQUENT OWNER of each NEW Crown product, for a period of three (3) years from the date of purchase by the original purchaser (the “warranty period”) that the new Crown product is free of defects in materials and workmanship, and we further warrant the new Crown product regardless of the reason for failure, except as excluded in this Warranty.
  • Page 18 XTi2 Series Power Amplifiers THIS PAGE INTENTIONALLY LEFT BLANK Operation Manual page 48...

  • Page 19: Product Registration

    XTi2 Series Power Amplifiers PRODUCT REGISTRATION Crown Audio, Inc. 1718 W. Mishawaka Rd. Elkhart, IN 46517-9439 Phone: 574-294-8000 Fax: 574-294-8329 www.crownaudio.com Online registration is also available at http://crownweb.crownintl.com/webregistration. Warranty is only valid within the country in which the product is purchased.
  • Page 20 XTi2 Series Power Amplifiers THIS PAGE INTENTIONALLY LEFT BLANK Operation Manual page 50...

  • Page 21: Crown Audio Factory Service Information

    XTi2 Series Power Amplifiers Crown Audio Factory Service Information Shipping Address: Crown Audio Factory Service, 1718 W. Mishawaka Rd., Elkhart, IN 46517 PLEASE PRINT CLEARLY SRA #: ______________________ (If sending product to Crown factory service.) Model: ______________________ Serial Number: _________________________ Purchase Date: ____________________...
  • Page 23 2Ω Stereo (per channel) 700W 4Ω Stereo (per channel) 500W 8Ω Stereo (per channel) 275W 8Ω Bridge - Mono 1,000W 4Ω Bridge - Mono 1,400W 2Ω Stereo (per channel) 1,000W 4Ω Stereo (per channel) 800W 8Ω Stereo (per channel) 475W 8Ω...
  • Page 24 PERF RFOR ORMA MANC ROLS ONNE Sensitivity (for full rated power at 4 ohms): Level: Two front-panel rotary level controls, Input Connectors: XLR, one per channel 1.4 Vrms one for each channel. Link/Out Connector: Loop-thru signal from input Frequency Response Power Switch: connector for linking another amplifier, one to the amplifier.

This manual is also suitable for:

Xti 2002Xti 4002

Table of Contents