Pairing To External Bt Device; Operation - Craig CMA3559 Owner's Manual

OPERATION

In first time use or re-pairing to new BT Device, pairing the unit to
external BT Device as below:
1. Slide the Power ON/OFF Switch on the rear of unit to ON position. Blue
Indicators on the front panel will light and blinking.
Important: Make sure the Audio connection cable haven't inserted to
the AUX IN Jack on the rear of unit. Otherwise, the unit will turn to
AUX IN mode. BT will not functioning.
2. Power on the external BT Device and enter to searching mode. Start
pairing as the on screen instructions on the external BT Device. After
paired, the Blue Indicator will stop blinking. (For details pairing procedures,
please refer to the user's manual of your BT Device).
Notes:
When the external BT Device searched the unit, our model number
"CMA 3559" will appear on the display of external BT Device.
Pairing code "0000" may need to enter.
Normal operation after pairing:
1. Turn on the BT function of the external BT Device.
2. Slide the Power ON/OFF Switch to ON position to power on the unit. The
Blue Indicator on the front panel will light, wait until the Blue Indicators is
stop blinking. (It needs take a few seconds).
3. Plays the music in the connected BT Device as usual.
4. During playback:
Press the + or – (Volume Up or Down) Buttons to adjust volume level
as desire.
Press the
Press and release the
5. If the unit was paired to a Cell Phone:
When a call is incoming during listening, press the
off then speak to the built-in microphone on the top of front panel to
answer the phone.
resume to music
Press and hold the
6. When finished listening, slide the Power ON/OFF Switch to OFF position to
shut off the unit.
(Play/Pause) Button to pause; press again to resume.
or Button to skip tracks.
When finished, press the
playback.
Button for last number redialing.
Button to hook on then
4
Button to hook