5. Using Template
Scanning Using Template
Users can also use a template to operate scanning on this equipment.
It enables users to register templates for scanning operations.
Once registering a template, users can operate the scanning operation quickly without
setting the scanning conditions.
NOTE:
Before scanning using a template, users must register a template for scan operations.
For instructions on how to register a template, see the following section.
SUPPLEMENT:
The templates that the Scan to E-mail agent is set will be available after user authenti-
cates the access rights for the Scan to E-mail operation. For instructions on how to
operate scan using a template, see the following section.
Scan Procedure using a template
1.
2.
60
P.68 "Registering Scan Template"
P.63 "Using Scan to E-mail template when SMTP Authentication is enabled"
Place the original(s).
•
For instruction about placing the originals, see Operator's Manual for
Basic Function.
Press the [TEMAPLATE] button on the control panel to enter
the template menu.
•
The screen to select a template group is displayed.
Scanning Guide — Scanning Using Template