Preparing For Backpack Operation; 2-4.1 Outline Of Preparation Procedures; 2-4.2 Installation Of Micomtrooper Battery - Motorola HF-SSB Owner's Manual

2-4. Preparing for Backpack Operation

2-4.1 Outline of Preparation Procedures
The preparation of a micomTrooper transceiver for operation includes:
1. Installation of battery in carrying harness.
2. Installation of transceiver in carrying harness.
3. Installation of antenna and audio accessories.
4. When ready to go − wearing the backpack carrying harness.
2-4.2 Installation of micomTrooper Battery
1. Place the carrying harness on a clean, flat surface.
2. Release the two battery flaps, and then release the two straps holding the
battery (all these items have Velcro fasteners).
3. Remove old battery, if any.
4. Visually check battery and battery pouch for dirt or damage. Clean if
necessary.
5. Orient the battery as shown in figure, and push the battery in place.
6. Reattach the two straps holding the battery, and then close the battery
pouch with its flaps (first the bottom flap, and then attach the upper flap).
2-6