Selecting A Radio Channel - Motorola CM360 User Manual

SELECTING A RADIO CHANNEL

Your radio offers up to 100 channels, however some
may not be programmed. Check with your dealer for
more information.
Your radio will power up on a preprogrammed
designated channel or the channel that it was on
when it was powered down.
Change Channels
Method 1
1 In the idle state use
G H
or to change
CHAN 34
channel e.g.:
Method 2.0 (Keypad Microphone)
If the default mode for the keypad microphone is
Channel entry then:
1 Enter the desired
CHAN 5
channel number from
the keypad, e.g. 05:
2 Either Long press on
C #
CHAN 5
or press
on the keypad (if
programmed) to
select the channel.
English 14
3 Display shows:
SELECTED
(for 2 seconds)
4 Display shows
CHAN 5
channel selected
Method 2.1 (Keypad Microphone)
If the default mode for the keypad microphone is not
channel entry, then enter the channel mode.
Method 2.2
Press the channel mode direct access button, if
programmed by your dealer.
Enter and select the channel number according to
Method 2.0
Method 2.3 :
C
1 Short press on To enter Menu
G H
CHANNEL
or until:
2
C
3 Short press on To select
CHAN 11
4 Display shows e.g.:
5 Enter and select the channel number
according to Method 2.0
Note: The keypad microphone cannot be used to
enter the channel number during a call or
whilst the radio is in a scan.