Connecting The Rjp(Remote Jack Pack) - Samsung 5 series Installation Manual

Connecting the RJP(Remote Jack Pack)

Output of any external source connected to RJP on hotel desk.
RJP Rear
HDMI cable

1. Connect the RJP port of the TV and the RS/232 port of the RJP.
2. Connect the PC IN [PC] / [AUDIO] port of the TV to the PC/AUDIO port of the RJP.
. Connect the AV IN [VIDEO]/[R-AUDIO-L] port of the TV to the RCA port of the RJP.
. Connect the [HDMI] port of the TV and the HDMI port of the RJP.
5. Connect the AV IN[VIDEO] port of the TV to the S-Video port of the RJP.
The RJP (Remote Jack Pack) compatible with this Samsung TV is TeleAdapt TA-7610, TA-7650 (HD)
➣
and TA-7660 (HD Plus).
♦ RJP (Remote Jack Pack)
RJP stands for Remote Jack Pack. The RJP is a hardware module that has different Audio Video
inputs (A/V, Audio, PC and HDMI) and corresponding outputs. The corresponding output sources
are connected from RJP to TV. The RJP communicates with the TV via RS232. Hot Plug & Play is a
function that allows hotel guests to connect an external source to the RJP. The RJP communicates
with the TV by sending messages regarding Active/Inactive sources.
The TV will switch to the Active external source according to the priority set by the User.
You have to connect the HDMI of the RJP to the HDMI 1 port of the TV.
➣
➣ When the TV is on, connect the TV and the RJP within 10 seconds.
♦ The RJP can be returned to the factory default settings by pressing the A/V and HDMI buttons
simultaneously for 10 seconds. All LEDs blink 5 times to Acknowledge that the rest has been
performed.
The RJP will automatically turn off any LEDs after 5 minutes to avoid unnecessary light
♦
pollution in the hotel room. The LEDs that were turned off will turn on again if the guest touches
any of the buttons and the 5 minute timer will restart. If the guest then touches another source
button, the TV will change to the selected source and the corresponding LED will be lit.
After an RJP Reset or a TV Power OFF/ON, it takes approx. 10 seconds to establish
♦
communications between the TV and the RJP.
♦ The following table shows the approximate time in seconds to switch from the TV to the input
source, based on the priority.
BN68-02157K-x0-Eng.indd 14
Video Cable
5
Video / Audio Cable

RS-22 Data Cable
1
D-sub / PC Audio cable
2
TV Rear Panel
English - 1
TV Side Panel
2009-04-16 ¿ÀÈÄ 5:03:22