Fujitsu Siemens Computers SCALEOVIEW S17-2 Operating Manual

Scaleoview lcd screen

Hide thumbs Also See for SCALEOVIEW S17-2:

User manual (33 pages)

Table Of Contents

Table of Contents

Quick Links

Need help?

Do you have a question about the SCALEOVIEW S17-2 and is the answer not in the manual?

Questions and answers

Summary of Contents for Fujitsu Siemens Computers SCALEOVIEW S17-2

Page 1 Monitor English Operating Manual SCALEOVIEW S17-2/S19-2/S20-1W...
Page 2 Are there..any technical problems or other questions which you would like to be clarified? Please contact our help desk (see Warranty Booklet). The latest information on our products, tips, updates, etc., can be found on the internet under: http://www.fujitsu-siemens.com...
Page 4 This manual was produced by cognitas. Gesellschaft für Technik-Dokumentation mbH – www.cognitas.de Published by Fujitsu Siemens Computers GmbH Order No.: A26361-K1018-Z120-1-7619 Edition 2 AG 1105 11/05...
Page 5: Lcd Screen
SCALEOVIEW S17-2/S19-2/S20-1W LCD screen Operating Manual November 2005 edition...
Page 6 VESA, DDC and DPMS are registered trademarks of Video Electronics Standards Association. Copyright © Fujitsu Siemens Computers GmbH 2005 All rights, including rights of translation, reproduction by printing, copying or similar methods, in part or in whole, are reserved. Offenders will be liable for damages.
Page 7: Table Of Contents
Contents Introduction............................1 Important notes............................. 2 Safety notes..........................2 Power cable..........................3 Transport ............................4 Cleaning ............................4 CE marking........................... 4 FCC Class B Compliance Statement ................... 4 Declaration of Conformity ......................5 Energy Star Guidelines......................... 6 Disposal and recycling ......................... 6 Checking the contents of the consignment...................
Page 9: Introduction
● high resolution (1280 x 1024) ● size of the display area comparable to that of a 19" (S17-2) or 21" (S19-2, S20-1W) CRT (Cathode Ray Tube) monitor ● presentation of up to 16.2 million colours (in conjunction with an appropriate graphics card) ●...
Page 10: Important Notes
SCALEOVIEW S17-2/S19-2/S20-1W Notational conventions The meanings of the symbols and fonts used in this manual are as follows: Pay particular attention to text marked with this symbol. Failure to observe this warning endangers your life, destroys the device, or may lead to loss of data.
Page 11: Power Cable
SCALEOVIEW S17-2/S19-2/S20-1W ● The monitor automatically sets itself to a mains voltage in the range of 100 V to 240 V. Ensure that the local mains voltage lies within these limits. ● Ensure that the power socket on the device or the grounded mains outlet is freely accessible.
Page 12: Transport
SCALEOVIEW S17-2/S19-2/S20-1W Transport ● Transport the monitor with care and only in its original packaging or another corresponding packaging fit to protect it against knocks and jolts. ● Never drop the LCD monitor (danger of glass breakage). Cleaning ● Always pull out the power plug before you clean the monitor.
Page 13: Declaration Of Conformity
Fax No.: (408) 746-8299 We, Fujitsu Siemens Computers Inc., hereby declare that the equipment bearing the trade name and model number specified above was tested confirming to the applicable FCC Rules under the most accurate measurement standards possible, and that all the necessary steps have been taken and are in force to assure that production units of the same equipment will continue to comply with the Commissions requirements.
Page 14: Energy Star Guidelines
20 million tons of carbon dioxide into the atmosphere - the equivalent of 5 million automobiles. As an Energy Star Partner, Fujitsu Siemens Computers GmbH has determined that this product meets the Energy Star guidelines for energy efficiency.
Page 15: Checking The Contents Of The Consignment
Check whether the delivery agrees with the details in the delivery note. The complete LCD monitor package includes: ● one monitor ● one data cable D-SUB / DVI-I (S17-2 / S19-2 only) D-SUB / D-SUB (S20-1W only) ● one data cable DVI-D/ DVI-D ● one power cable ●...
Page 16: Installing An Ergonomic Video Workstation
SCALEOVIEW S17-2/S19-2/S20-1W Installing an ergonomic video workstation Before you set up your equipment, you should select a suitable position for working at the monitor. Please observe the following advice when installing a video workstation. 600 mm 600 mm Avoid glare from electric...
Page 17: Mounting And Removing The Monitor Base
SCALEOVIEW S17-2/S19-2/S20-1W Mounting and removing the monitor base The display surface is susceptible to scratching! Therefore, lay the monitor on a soft surface when mounting or removing the monitor base. Folding out monitor base When delivered the lower part of the monitor base is folded in.
Page 18: Removing Monitor Base
SCALEOVIEW S17-2/S19-2/S20-1W Removing monitor base Before you can use a swivel arm or a wall bracket, you must remove the monitor base: ► Lay the monitor on its face on a soft surface. The display surface is susceptible to scratching! ►...
Page 19: Connecting The Monitor
Do not cover the ventilation openings of the monitor. The computer power plug must be pulled out! ► Be sure that the monitor and the computer are switched off. Connecting cables to the monitor S17-2 / S19-2 S20-1W 7 34 2 3 4 Connector for the power supply...
Page 20: Connecting Cables To The Computer
SCALEOVIEW S17-2/S19-2/S20-1W ► Connect the angled plug of the data cable to the DVI connection socket (2) or the D-SUB connection socket (7 only for model S20-1W) on the monitor, and secure the connection by tightening the securing screws. ►...
Page 21: Operation Of The Monitor
SCALEOVIEW S17-2/S19-2/S20-1W Operation of the monitor The monitor offers the following possibilities that enable it to be optimally adjusted for the respective user and the respective situation. Adjusting rake and height Adjusting rake The rake of the monitor can be adjusted by 0° (forward) and +20° (back) from its vertical position.
Page 22: Switching The Monitor On/Off
SCALEOVIEW S17-2/S19-2/S20-1W Switching the monitor on/off Buttons for the OSD menu (On-Screen-display) Power indicator ON/OFF switch 1 2 3 The ON/OFF switch (3) is used for switching the monitor on and off. The power indicator (2) lights up blue when the monitor and computer are switched on. The power indicator lights up orange when the monitor does not receive a video signal or is in the energy saving mode.
Page 23: Notes On Power Management
Function the monitor is working the screen is dark normally 48 W (S17-2) max. Power consumption reduced to < 3 W 60 W (S19-2) max. 60 W max. (S20-1W) If your computer detects inactivity (no input) it sends an appropriate signal to the monitor to reduce the power consumption (energy-saving mode).
Page 24 Press the AUTO/EXIT button for approx. 1 second while the OSD menu is switched off. The Auto Processing message is displayed. Picture quality and position are set to optimum values for your system. Setting up the background lighting (S17-2 / S19-2 only) ► Press the 5 button for calling the Brightness setting window.
Page 25 SCALEOVIEW S17-2/S19-2/S20-1W Monitor settings using the OSD menu With the buttons on the control panel, call up and use the integrated OSD (On-Screen display) menu. The OSD menu is available in different languages. The English menu names are used in the following description (default setting).
Page 26 SCALEOVIEW S17-2/S19-2/S20-1W The first function (H-Position) is highlighted. If necessary, press the 6 or 5 button to ► mark another function. ► Press the MENU/SEL button to select the highlighted function. Press the 6 or 5 button to adjust the value ►...
Page 27 SCALEOVIEW S17-2/S19-2/S20-1W Adjusting size and position Calling the Image adjust setting window H-Position Adjusting the horizontal position With this function you move the picture to the left or to the right. V-Position Adjusting the vertical position With this function you move the picture up or down.
Page 28 SCALEOVIEW S17-2/S19-2/S20-1W Setting display of the OSD menu Calling the OSD Setup setting window Setting language for the OSD menu Language With this function you select the language for the OSD menu. The following languages are offered: English (default setting)
Page 29: Notes On Ergonomic Colour Adjustment
SCALEOVIEW S17-2/S19-2/S20-1W Displaying information Calling the Information setting window With this function the model designation, serial number, resolution, H/V frequency, input signal and polarity of the synchronisation signal are displayed. Notes on ergonomic colour adjustment If you select colours for the display in your application programmes, take note of the information below.
Page 30: Troubleshooting
## kHz / ## Hz ► Adjust the video frequency range using the S17-2 / S19-2 model: computer software (see documentation for your computer or your graphics card). Please change the display mode to 1280x1024 with 60 Hz.
Page 31 SCALEOVIEW S17-2/S19-2/S20-1W Having this problem? Check the following points: Picture is shaking ► Check whether the data cable for the monitor is correctly attached to the monitor port on the computer. ► Press the AUTO/EXIT button to perform the auto-adjustment of the screen.
Page 32: Technical Data
● one audio cable ● one mains adapter with mains adapter cable Storable display modes: 20, 9 of which are preset (S17-2 / S19-2) 24, 10 of which are preset (20-1W) Electrical data Video: analogue, positive, 0.7 V , 75 Ω...
Page 33: Vesa-Ddc-Compatible Vga Interface
VGA interface, it can automatically read the data for ensuring optimum operation from your monitor and select the appropriate settings. If the monitor SCALEOVIEW S17-2/S19-2/S20-1W is not yet displayed in the list of monitors, you can select the following monitor instead:...
Page 34: Preset Operating Modes
1680 x 1050 60 Hz For ergonomic reasons, a screen resolution of 1280 x 1024 is recommended for monitors S17-2 and S19-2. For monitor S20-1W we recommend a screen resolution of 1680 x 1050. Because of the technology used (active matrix) an LCD monitor provides a totally flicker-free picture even with a refresh rate of 60 Hz.
Page 35: Monitor Port Dvi-I
SCALEOVIEW S17-2/S19-2/S20-1W Monitor port DVI-I C1 C2 Meaning Meaning Meaning TMDS Data2- TMDS Data 1/3 Shield TMDS Data2+ TMDS Clock Shield TMDS Data 2/4 Shield Clock+ NC (Not connected) +5V Power Clock- Earth DDC Clock Hot Plug Detect Analogue R Video Out...
Page 36: Pin Assignment D-Sub
SCALEOVIEW S17-2/S19-2/S20-1W Pin assignment D-SUB (S20-1W only) Meaning Meaning Video input red +5 V (DDC) Video input green Sync. earth Video input blue Earth Earth DDC-Data Earth H. sync Red video earth V. sync Green video earth DDC Clock Blue video earth...

This manual is also suitable for:

Scaleoview s19-2 Scaleoview s20-1w