Topshine MT100 User Manual
  1. Manuals
  2. Brands
  3. Topshine Manuals
  4. GPS
  5. MT100
  6. User manual

Topshine MT100 User Manual

Gps vehicle tracker
Hide thumbs
Table of Contents

Advertisement

Quick Links

TOPSHINE TRACKING TECHNOLOGY
USER MANUAL OF MT100
GPS Vehicle Tracker
v
USER MANUAL (Model: MT100)
Please read carefully before operation
- 1 -

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MT100 and is the answer not in the manual?

Questions and answers

Related Manuals for Topshine MT100

Summary of Contents for Topshine MT100

  • Page 1 TOPSHINE TRACKING TECHNOLOGY USER MANUAL OF MT100 GPS Vehicle Tracker USER MANUAL (Model: MT100) Please read carefully before operation - 1 -...

  • Page 2: Table Of Contents

    TOPSHINE TRACKING TECHNOLOGY USER MANUAL OF MT100 Contents Product overview ........................3 Applications ..........................3 Product Function and Specifications..................4 3.1 Product function........................4 3.2 Specifications ........................5 MT100 and Accessories ......................6 Installation..........................6 5.1 Installation SIM card......................6 5.2 Charging..........................7 5.3 LED Indications ........................7 5.4 Install I/O cable........................8 5.5 Power/GND.........................8...

  • Page 3: Product Overview

    USER MANUAL OF MT100 1. Product overview MT100 is a kind of mini GPS vehicle tracking product can be used for tracking and security of motorcycle and automobile etc. Mini size, built-in antenna and waterproof designed, easy to be installed and concealed, with power voltage range from 6V~24V, therefore can satisfy tracking and security demands for all kinds of vehicles.

  • Page 4: Product Function And Specifications

    TOPSHINE TRACKING TECHNOLOGY USER MANUAL OF MT100 3. Product Function and Specifications 3.1 Product function  OTA function (support over the air)  Harsh acceleration alert/Braking alert  Engine idle alert/low power alert/power failure alert  Oil leaking/Refuel alarm ...

  • Page 5: Specifications

    TOPSHINE TRACKING TECHNOLOGY USER MANUAL OF MT100 3.2 Specifications Items Specifications Dimension 80*58*22mm Weight Charging voltage +9V~+24V SIM Card type Power consumption Active mode(peak)<1.0 A Active mode(avg.)<300 Ma Idle mode <50 mA -20~+75 ℃ Operating temperature Humidity Up to 75% non-condensing...

  • Page 6: Mt100 And Accessories

    Check that the SIM card has not run out of credit (test the SIM card in a phone to make sure it can send and receive SMS); Before installing the SIM card, turn off the power for MT100. Then install the SIM card as following: - 6 -...

  • Page 7: Charging

    Connect the device with external power like car battery, and turn on its power switch, then it will do charging automatically 5.3 LED Indications Push the power switch to turn on/off MT100 GPS LED (Red) Flashing ( every 0.1 second) Initializing or back-up battery power is low Flashing (0.1 second on and 2.9 seconds off)

  • Page 8: Install I/O Cable

    TOPSHINE TRACKING TECHNOLOGY USER MANUAL OF MT100 5.4 Install I/O cable The I/O cable includes power, Negative/positive Input and Output PIN Number Description Output 3 E.g. connected with siren AD 1 10 Bits Resolution Analog Inputs. 0~6V DC Detection. It can be used to connect with fuel sensor etc.

  • Page 9: Digital Input (Negative Triggering)

    TOPSHINE TRACKING TECHNOLOGY USER MANUAL OF MT100 5.6 Digital Input (Negative Triggering) E.g. Detecting SOS button Input 1 or Input 2 or Input 3 White SOS Button 5.7 Digital Input (Positive triggering) E.g. detecting engine on/off status 5.8 Output PIN IN and OUT 1 application example:...

  • Page 10: Basic Sms Commands

    Another easier way to get MT100’s position: Use your mobile phone to call the SIM number in the MT100, after hearing several times ring, then hung up, MT100 will send a SMS with location information back to your mobile phone.

  • Page 11: Set Function Of Receiving Actual Address Name Via Sms

    TOPSHINE TRACKING TECHNOLOGY USER MANUAL OF MT100 6.2 Set function of receiving actual address name via SMS Description: To know specific address of your MT100, send an SMS and you will receive an SMS with its location physical address name.

  • Page 12: To Cut Off Engine, Immobilize The Vehicle

    TOPSHINE TRACKING TECHNOLOGY USER MANUAL OF MT100 6.4 To cut off Engine, immobilize the vehicle Command: W<password>,020,P,F Description: P=1, means output1, P=2 means output2 … P=5, means output5 F=0, to disable this output function; F=1, to enable this output function...

  • Page 13: Oil Leaking/Refuel Alarm

    TOPSHINE TRACKING TECHNOLOGY USER MANUAL OF MT100 Meaning：When the speed is over 20km/h, if the speed increase over 5 km/h in 5 seconds, the tracker will trigger acceleration alert, send the alarm data to tracking platform. (2) Braking Alert: When the speed is over 20km/h, if the speed decrease over (X+10) km/h in 5 seconds, the tracker will let out braking alert, send the alarm data to tracking platform, the protocol number is 0x72.

  • Page 14: Set Sms For Gprs Tracking

    TOPSHINE TRACKING TECHNOLOGY USER MANUAL OF MT100 7. Set SMS for GPRS tracking 7.1 Set ID by SMS Command: W<password>,010,ID Description: every tracker has a unique ID. Tracker ID must be less than 14 digitals Example: SMS send:W000000,010,20120823 Meaning: this tracker’s ID is 20120823 7.2 Set APN by SMS...

  • Page 15: Set Time Interval For Sending Gprs Packet

    TOPSHINE TRACKING TECHNOLOGY USER MANUAL OF MT100 7.5 Set Time Interval for Sending GPRS Packet Command :W<password>,014,XXXXX Description: XXXXX should be in five digitals and in unit of 10 seconds. XXXXX =00000, to disable this function XXXXX =00001~65535, time interval for sending GPRS packet and in...

  • Page 16: Troubleshooting

    Wrong password in your SMS Insert the correct password The SIM in MT100 has run out of Replace or top up the SIM card credit No SIM card Insert working SIM card. Check in phone that the SIM can send SMS messages.

  • Page 17: Appendix 1 Configure By Computer

    Run “CP210x_Prolific_DriverInstaller” to install the driver for the USB data cable. Note: CP210x_Prolific_DriverInstaller is in the folder ‘USB-232 Driver’ in the CD. Connect the USB Data Cable between MT100 and PC. Connect the configuration cable with PC, open device management of your computer.
  • Page 18 USER MANUAL OF MT100 Step 3 Open the GPS Tracker Parameter Editor 1. Connect MT100 with PC by the configuration cable 2. Confirm MT100 is in the Power Off states 3. Double click GPS Tracker Parameter Editor.exe and Select the COM Port, following picture shows: 4.
  • Page 19 TOPSHINE TRACKING TECHNOLOGY USER MANUAL OF MT100 Instruction of parameter setting: Item Description GPRS Tick to enable GPRS function, select TCP or UDP mode Tracker ID Should be unique, in number, maximum 14 bytes APN, APN Account, APN Put your local APN, APN username and password if...
  • Page 20 TOPSHINE TRACKING TECHNOLOGY USER MANUAL OF MT100 Item Description SMS tracking No. Interval To put a mobile phone number for automatic tracking by SMS at certain time interval in minutes Password To set SMS command password, the default is 000000,...

  • Page 21: Appendix 2 Command List

    Tick it to send alert when the external power be cut off Appendix 2 Command List Presetting by SMS for GPRS tracking Set ID for MT100 by SMS W******,010,ID Tracker ID must be less than 14 digits Set APN by SMS...
  • Page 22 GPS stops working. GSM unit of minute. enters standby mode and Example: stop sending out message If XX=10, MT100 will enter until it is activated by an power SMS or an incoming call) saving mode in 10 minutes after it is immobile.
  • Page 23 This command will reset the current password factory default password 000000 Description Command Remarks current W******,000 Get current location of MT100 location http://maps.google.com/map Get location in W******,100 s?f=q&hl=en&q=22.542563 Google map URL ,114.077971&ie=UTF8&z= format via SMS 16&iwloc=addr&om=1 ****** is old password Change user’s...
  • Page 24 =08, 2000m Extend Settings W******,008,ABC A=0, disable position report function DEFGHIJ### when a call is made to MT100 A=1, enable position report function to get position SMS by Calling MT100 I=0, disable power failure alert I=1, enable power failure alert...

  • Page 25: Appendix 3 Configure And Use Of Rfid Function

    TOPSHINE TRACKING TECHNOLOGY USER MANUAL OF MT100 3. Send W******,017 or W******,117 without data to disable this function. Appendix 3 Configure and use of RFID function RFID Reader RFID Tag 1. Install RFID as following: 2. How to use 2.1 SMS Commands 2.1.1...
  • Page 26 TOPSHINE TRACKING TECHNOLOGY USER MANUAL OF MT100 2.1.2 To configure authorized RFID tag by SMS commands W<password>,060,num1 W<password>,160,num2 W<password>,260,num3 W<password>,360,num4 W<password>,460,num5 Note: The default password is 000000 Num1, num2, num3, num4, num5 means 5 digital FRID number. For example: if configure NO.00412 as the authorized RFID tag, then send SMS: W000000,060,00412 Tracker will reply SMS “STUDY ID OK: 1:00412;...
  • Page 27 TOPSHINE TRACKING TECHNOLOGY USER MANUAL OF MT100 Turn on MT100 and it will connect with the Editor automatic, As soon as they connect successful, all the buttons are availability and the status bar will clue on’ Tracker Connect!’ , then you can Read or Write the MT100’s Parameters Step 2: Finding RFID Settings (as following picture).
  • Page 28 TOPSHINE TRACKING TECHNOLOGY USER MANUAL OF MT100 2.1.4 Judge if need to cut off oil/fuel supply when the ignition alert occurs to stop engine start. Enable function of cutting off oil-way when illegally ignite under ARM status SMS command: W<password>,061,1 Disable function of cutting off oil-way when illegally ignite under ARM status SMS command: W<password>,061,0...
  • Page 29 TOPSHINE TRACKING TECHNOLOGY USER MANUAL OF MT100 3. Command List Description Command Reply SMS Configure authorized RFID tag STUDY ID OK: 1:num1; 2:num2; W<password>,060,num1 3:num3; 4:num4; 5:num5; W<password>,160,num2 The next SMS: NOW ID……… W<password>,260,num3 W<password>,360,num4 W<password>,460,num5 Enable the RFID detection ENABLE OK ! W<password>,062,1...
  • Page 30 TOPSHINE TRACKING TECHNOLOGY USER MANUAL OF MT100 number, after several rings and hang off automatically, indicating the vehicle be armed. 4.5 If alert be triggered, the siren will sound for 10 seconds and shut or immediately shut when disarm action is detected.
  • Page 31 TOPSHINE TRACKING TECHNOLOGY USER MANUAL OF MT100 5.4 Click Driver Manage , such as instructed 4；it will open such as instructed A； You can click New, such as instructed 5, open as following picture P4; to add tag ID and the driver’s information etc.

Table of Contents