Entering System Programming Mode; Programming Structure - Panasonic KX-TAW848 Features Manual

Entering System Programming Mode

Using a PT to perform system programming allows an authorized extension user to set a wide range of PBX
features and parameters.
There are two levels of system programming that can be performed with a PT—administrator level
programming and user level programming.
Administrator Level: All system programming that can be performed with a PT is accessible.
PROGRAM/
PAUSE
User Level: System programming that has been made accessible to PT users through PC programming
can be performed.
PROGRAM/
PAUSE
Note
is used throughout these pages to indicate the default value for the given setting.

Programming Structure

Programming Number
[0XX]
[1XX]
[2XX]
[3XX]
[4XX]
[5XX]
[6XX]
[7XX]
[8XX]
[9XX]
System Password for Administrator
#
—for PT Programming
= 1234
System Password for User
—for PT Programming
= 1234
Programming Group Title
Basic Programming
System Management
Programming
Time Programming
TRS/ARS Programming
CO Line Programming
COS Programming
Extension Programming
Resource/Interface
Programming
SMDR & Maintenance
Programming
Card Programming
Programming No.
3 digits
Programming No.
3 digits
Description
Frequently used programming steps
Global system parameters
Flexible system timers
Toll Restriction (TRS) and Automatic Route
Selection (ARS) parameters
CO line and CO line group settings
COS parameters
Assignment of extension features
Assignment of various interfaces of the PBX
Setting of Station Message Detail Recording
(SMDR) and maintenance features
Used to display the cards currently installed in
the PBX, or to "delete" a card from system
programming before physically removing it.
3.3 PT Programming
Feature Guide 207