Disk Repartition - Transcend JetFlash 220 User Manual

By default, the entire capacity of your JetFlash 220 is publicly accessible to all users without fingerprint
verification, allowing the drive to be used just like a normal USB flash drive. To start using the JetFlash 220's
256-bit AES fingerprint security, you will need to create a private storage are on the drive. The Repartition
feature allows you to divide the JetFlash 220 into two partitions, one public and one private. The advantage
of this feature is that you can customize the size of the Private and Public areas on the JetFlash 220 to suit
your requirements. Any information saved to the private disk is securely protected and can only be accessed
by logging in with the Fingerprint Verification software.
WARNING! Partitioning the JetFlash 220 will erase any information on the disk (except
for the registered fingerprints). Please backup any data that you have stored on the drive
before repartitioning the JetFlash 220.
1.
If you want to adjust the size of your public and private areas on your JetFlash 220, plug the drive into an
available USB port on your desktop or notebook computer and run the Fingerprint Application software.
2.
Select Disk Repartition.
3.
You can customize the size of the Private and Public areas on the JetFlash 220 by sliding the
adjustment bar to the left or right. After you have divided the JetFlash 220's Private and Public areas into
your desired sizes, click on the "Format" button to begin repartitioning the drive.
4.
When the repartition process is complete, the Repartition Wizard will restore your user profile to the
JetFlash 220 (Including all settings, passwords and fingerprints).
5.
A "Format Complete" message window will appear confirming that the disk has been successfully
repartitioned. Unplug the JetFlash 220 from your computer and plug it back in to activate the new
settings.

Disk Repartition

Figure22. System Tray Menu – Disk Repartition
15