Changing A User Password - Cisco WAP121 Administration Manual

Administration
User Accounts
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
NOTE
STEP 1
STEP 2
STEP 3
Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE
Click Administration > User Accounts in the navigation window.
The User Account Table displays the currently configured users. The user cisco is
preconfigured in the system to have Read/Write privileges. This user cannot be
deleted. However, you can change the password.
All other users can have Read Only Access, but not Read/Write access.
Click Add. A new row of text boxes displays.
Select the checkbox for the new user and click Edit.
Enter a User Name between 1 to 32 alphanumeric characters. Only numbers 0-9
and letters a-z (upper or lower) are allowed for user names.
Enter a New Password between 1 and 64 characters and then enter the same
password in the Confirm New Password text box.
As you enter a password, the number and color of vertical bars changes to
indicate the password strength, as follows:
• Red—The password fails to meet the minimum complexity requirements.
• Orange—The password meets the minimum complexity requirements but
the password strength is weak.
• Green—The password is strong.
Click Save. The changes are saved to the Running Configuration and to the Startup
Configuration.
To delete a user, select the check box next to the user name and click Delete.

Changing a User Password

To change a user password:
Click Administration > User Accounts in the navigation window.
Select the user to configure and click Edit.
Enter a New Password between 1 and 64 characters and then enter the same
password in the Confirm New Password text box.
As you enter a password, the number and color of vertical bars changes to
indicate the password strength, as follows:
3
30