Toyota TAS200 Owner's Manual page 49

When problems occur while the iPod is connected to this unit, a message will appear on
the display. Refer to the table below to identify the problem, then take the suggested
corrective action.
ErrOr 4
CONNECTION
ErrOr
DEVICE ErrOr
NO SONGS
EMPTY
STOP
When problems occur with the USB portable audio player/USB memory is connected to
this unit, a message will appear on the display. Refer to the table below to identify the
problem, then take the suggested corrective action.
ErrOr 4
CONNECTION
ErrOr
DEVICE ErrOr
NO SONGS
48 TAS200
This appears when there is excess current flow.
Contact your authorized repairer and ask for repair.
Communication failure.
Disconnect the cable from the iPod. Once the iPod main menu
appears in the iPod display, connect the cable again.
This appears when a unsupported iPod is connected.
Disconnect the device.
No songs.
Transfer the songs to the iPod.
There are no songs in the selected list.
Select a list that contains songs.
iPod has stopped.
Select again from list or connect the iPod again.
If the iPod freezes, reset and connect again.
This appears when there is excess current flow.
Contact your authorized repairer and ask for repair.
Communication failure.
Disconnect the USB portable audio player/USB memory and connect
again.
This appears when an unsupported USB portable audio player/USB
memory is connected. Disconnect the device.
This appears when an MP3/WMA/AAC file format is unusual and not
supported by this unit like WAV format recordings.
Please check the MP3/WMA/AAC file format.
A