Troubleshooting Guide - Sealife DC1400 Instruction Manual

TROUBLESHOOTING GUIDE

Refer to the symptoms and solutions listed below before sending the camera
for repairs. Any updates may be found on the SeaLife website at www.sealife-
cameras.com. Look for "Techncial Updates" section. If the problem persists,
contact your local SeaLife dealer for service.
Symptom
The power does not
come on.
The battery runs out
quickly.
The battery or camera
feels warm
Even if I press the
shutter button, the
camera does not take
a picture.
Images do not appear
on the LCD monitor.
Cause
The battery is not
inserted correctly.
The battery is exhausted.
The battery is not fully
charged. The battery is
not used for an extended
period of time after being
charged.
Long period of
continuous use of the
camera of the flash.
The shutter button is
not pressed all the way
down.
The memory card
does not have any free
capacity.
The flash is charging.
The memory card is
write-protected.
LCD monitor is dark.
Solutions / Corrective
Actions
Insert the battery
correctly.
Recharge the battery.
Fully charge the battery
and discharge it for at
least one complete cycle
before use to maximize its
performance and lifetime.
Press the shutter button
all the way down.
Insert a new memory card,
or delete unwanted files.
Wait until the status LED
is green.
Remove the
write-protection.
Adjust the brightness of
the LCD monitor in the
menu.
79